CRYORIG C7 Cu Top Flow Low Profile CPU Cooler with Full Copper top ,92mm fan, Curiously Small Impressively Cool Universally Compatible for Intel 1700/1200/ 1150/1151/1155/1156, AMD AM4/AM3+/AM2+/FM1/FM2+ . 47mm Tall,

This amazing little heatsink weighs a lot more than it looks. Highly recommended for SFF builds but take note, if you're installing into a Dancase A4-SFX it's too close to side panel and generates a lot of air turbulence noise that's very annoying (even trying a Noctua A9 fan is no good). This amazing little heatsink weighs a lot more than it looks. Highly recommended for SFF builds but take note, if you're installing into a Dancase A4-SFX it's too close to side panel and generates a lot of air turbulence noise that's very annoying (even trying a Noctua A9 fan is no good).

Pretty good fan for the price. Comes with everything you need and is compatible with lots of mbs. Good upgrade imo from the default fan. Pretty good fan for the price. Comes with everything you need and is compatible with lots of mbs. Good upgrade imo from the default fan.

great cooling for size. solid build quality great cooling for size. solid build quality

Used this fan in a custom build in a Node-202 low-profile case with a micro-ATX motherboard. Very low profile so fits the vertical height well. The edges are very close against the other components bit was able to install it by unclipping the plastic shroud and then reattaching it after tightening the screws. Good cooling performance. Nice and quiet. Used this fan in a custom build in a Node-202 low-profile case with a micro-ATX motherboard. Very low profile so fits the vertical height well. The edges are very close against the other components bit was able to install it by unclipping the plastic shroud and then reattaching it after tightening the screws. Good cooling performance. Nice and quiet.

There is a satisfying weight to this compact cooler when you take it out of the box. It looks, and feels like a quality CPU cooler. I put this on a 9th gen Core i5, and it was way, way better than the stock cooler (as you'd expect) - quieter and cooler by far. I did find that whilst it's "in" the CPU exclusion zone, it was a very close fit to some raised components of the Mini-ITX board I used for my build, so I had to find the perfect orientation through test-fitting before I committed to pasting my CPU, but it did fit. Prime 95 stress testing sees my CPU top out at about 80oC and the fan tops out about 2700 rpm. It's audible at this level,...view more There is a satisfying weight to this compact cooler when you take it out of the box. It looks, and feels like a quality CPU cooler. I put this on a 9th gen Core i5, and it was way, way better than the stock cooler (as you'd expect) - quieter and cooler by far. I did find that whilst it's "in" the CPU exclusion zone, it was a very close fit to some raised components of the Mini-ITX board I used for my build, so I had to find the perfect orientation through test-fitting before I committed to pasting my CPU, but it did fit. Prime 95 stress testing sees my CPU top out at about 80oC and the fan tops out about 2700 rpm. It's audible at this level, but not invasively so. A great purchase for the hardware I'm using.

We replaced an old noisy fan, this one is quiet, and keeps the CPU cool We replaced an old noisy fan, this one is quiet, and keeps the CPU cool

TL;DR: Very compact, easy install, good enough to keep more or less up with a 3600X but you DO need to tweak fan curves and it will run a bit warm

I have this cooling off a 3600X in a living room PC. I'd read some reviews saying this is kind of a noisy cooler but thought I might be okay, which was a bit of a "yes and yes" on both fronts.
I went with the full copper one to try and get a bit of extra performance. All in all, the 3600X is a bit of a higher-powered part for this guy, at all defaults this was indeed a bit of a screecher. I had to go into BIOS and tweak my fan curves but, after doing that, looks like the system itself has been ...view more TL;DR: Very compact, easy install, good enough to keep more or less up with a 3600X but you DO need to tweak fan curves and it will run a bit warm

I have this cooling off a 3600X in a living room PC. I'd read some reviews saying this is kind of a noisy cooler but thought I might be okay, which was a bit of a "yes and yes" on both fronts.
I went with the full copper one to try and get a bit of extra performance. All in all, the 3600X is a bit of a higher-powered part for this guy, at all defaults this was indeed a bit of a screecher. I had to go into BIOS and tweak my fan curves but, after doing that, looks like the system itself has been doing fine (been running it for like a couple of weeks).

All in all it DID get the job done but the one I had before, the Cooler Master Gemini II, is a much better part. If it was available (I couldn't find it for AM4) I'd definitely go with it again. but this IS both lower height AND lesser footprint (the Gemini would likely hang over my RAM in this machine as well, which COULD be fiddly) so it IS working with tighter constraints, making this a not entirely fair comparison.

Easy install process and, again, once it's set up it's going to get the job done, but you DO want to manually set up your fan curves

Cryrorigs low profile coolers have always been great, but the C7 Cu is absolutely fantastic! Sure it's a bit heavier, but it's higher TDP and low height means it will fit in almost any system AND will make sure to keep it cool. The fan can get a little loud at times, but there are some decent options to improve it; I found a fan adapter that lets me mount a 140 mm fan and it works beautifully!

I'd highly recommend this product if you're building a mini-itx/SFF system and don't have alot of room. Cryrorigs low profile coolers have always been great, but the C7 Cu is absolutely fantastic! Sure it's a bit heavier, but it's higher TDP and low height means it will fit in almost any system AND will make sure to keep it cool. The fan can get a little loud at times, but there are some decent options to improve it; I found a fan adapter that lets me mount a 140 mm fan and it works beautifully!

I'd highly recommend this product if you're building a mini-itx/SFF system and don't have alot of room.