GIVE FEEDBACK
  • Zalman CNPS8000B CPU cooler - height is 66mm and designed to be installed in ATX case as well as slim or LP (low profile) cases for Intel Socket 1155/1156/1150/1366/775 For AMD Socket AM3+/AM3/AM2+/AM2/FM1/FM2

    • Overview
    • Features
    • Specifications
    • Q&A
    • Reviews

    Generating Print Page

    Zalman CNPS8000B CPU cooler - height is 66mm and designed to be installed in ATX case as well as slim or LP (low profile) cases for Intel Socket 1155/1156/1150/1366/775 For AMD Socket AM3+/AM3/AM2+/AM2/FM1/FM2

    Zalman CNPS8000B CPU cooler - height is 66mm and designed to be installed in ATX case as well as...

    • Brand: Zalman
    • MPN: CNPS8000B
    • Part #: FANZAL20008
    • UPC:823884202427

    What PB Tech customers are saying about this product...See More Reviews

    "Used these for my server board and works great...."
     Teik H. ~ 02-07-18
    "Fits nicely into my mini itx case. I found it quiet setup with the motherboards PWM CPU Fan support. Efficient. Works fine with socket 1151 motherboard."
     Michael T. ~ 23-01-16   VERIFIED OWNER
    "An OK replacement for the stock Intel cooler. But it is definitely noisier than the stock Intel fan and is a disappointment in that respect. The fan noise isn't bad but it is noticeable in a quiet..."
    more
     John A. ~ 10-12-15   VERIFIED OWNER

    Features

    Fluid Shield Bearing

    With FSB (Fluid Shield Bearing) bearings, the fan`s lifespan and noise is improved considerably compared to previous sleeve bearing fans, while the fan noise has been noticeably reduced.

    Shark`s Fin Blade Fan

    Optimized for maximum airflow, Shark`s Fin Blade Fan greatly reduces the turbulence caused by fan rotation, thus decreasing the noise and vibration while increasing the airflow.

    Powerful Cooling Performance

    Four heatpipes and aluminum fins are designed for maximum cooling while Shark`s Fin Blade Fan minimizes noise and cools not only the CPU but also provides powerful peripheral cooling.

    Slim Profile

    The CPU cooler`s height is 66mm and designed to be installed in ATX case as well as slim or LP (low profile) cases.

    Specifications

    Dimensions 
    108(L) X 108(W) X 66(H)mm
    Weight 
    330g
    Materials 
    Fins: Aluminum / Base: Copper
    Dissipation Area 
    2,872?
    Heatpipes 
    4 `c` Shaped Heatpipes
    Fan 
    4 Pin 92mm PWM Fan
    Fan RPM 
    1,400 ~ 2,800rpm ± 10 %
    Noise 
    20 ~ 32dBA ± 10 %
    Fan Bearing 
    FSB (Fluid Shield Bearing)
    Manufacturer Part No: CNPS8000B Brand: Zalman Product Type: -
    UPC 823884202427 Product Family: - Shipping Weight: 0.55 kg
    PB Part No: FANZAL20008 Product Model: -

    Warranty: 12 months *
    * Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
    All warranties are return to base unless otherwise specified.

    Customer Questions & Answers

    Want to know something about this product? Ask a question which other users may be able to answer.

    Reviews

    4.2 out of 5 StarsBased on 5 Reviews

    5 Stars
    2
    4 Stars
    2
    3 Stars
    1
    2 Stars
    0
    1 Star
    0

    Filter Results

    Do you own this product?

    Write a review and go into the draw to win great prizes each month! Learn more WRITE A REVIEW
    Displaying 1 - 5 of 5 reviews
    Teik H.

    Excellent

    2 July 2018
    Used these for my server board and works great....
    Did you find it helpful? 
    0 out of 0 users found this review helpful
    Michael T.
    VERIFIED OWNER
    23 January 2016
    Fits nicely into my mini itx case. I found it quiet setup with the motherboards PWM CPU Fan support. Efficient. Works fine with socket 1151 motherboard.
    Did you find it helpful? 
    0 out of 0 users found this review helpful
    John A.
    VERIFIED OWNER
    10 December 2015
    An OK replacement for the stock Intel cooler. But it is definitely noisier than the stock Intel fan and is a disappointment in that respect. The fan noise isn't bad but it is noticeable in a quiet environment. It is OK at idle but anything above is audible whereas it took a bit of additional CPU workload for the stock fan to be noticeable. It is quite a bit taller than the stock fan too. The kit itself is complete and has everything needed for fitting to an Intel or AMD CPU.
    Did you find it helpful? 
    0 out of 0 users found this review helpful
    Warren W.
    VERIFIED OWNER
    29 September 2015
    Great little cooler, all mounting kit included. Quiet and efficient.
    Did you find it helpful? 
    0 out of 0 users found this review helpful
    Brian
    17 December 2014
    Stock fan and heatsink on AMD Athlon II X4 620 quad core would run at 90+ degrees C under 90 CPU load. This cooler is running 52 degrees C. It's cheap (currently on special for $33.35 inc. GST) and effective.
    Did you find it helpful? 
    0 out of 0 users found this review helpful

    Zalman CNPS8000B CPU cooler - height is 66mm and designed to be installed in ATX case as well as slim or LP (low profile) cases for Intel Socket 1155/1156/1150/1366/775 For AMD Socket AM3+/AM3/AM2+/AM2/FM1/FM2

    • Brand: Zalman
    • MPN: CNPS8000B
    • Part #: FANZAL20008
    • UPC:823884202427
    AUD $24.42 Excluding GST
    Date Created: 14:29, 12-12-2018
    Product URL: https://www.pbtech.com/au/product/FANZAL20008/Zalman-CNPS8000B-CPU-cooler---height-is-66mm-and-d
    Branch
    New Stock
    On Display
    Penrose
    0
    North Shore
    0
    Manukau
    0
    Auckland CBD
    0
    Auckland Uni
    0
    Henderson
    0
    Hamilton
    0
    Tauranga
    0
    New Plymouth
    0
    Wellington
    0
    Christchurch
    0
    Head Office (Web)
    0

    Features

    Fluid Shield Bearing

    With FSB (Fluid Shield Bearing) bearings, the fan`s lifespan and noise is improved considerably compared to previous sleeve bearing fans, while the fan noise has been noticeably reduced.

    Shark`s Fin Blade Fan

    Optimized for maximum airflow, Shark`s Fin Blade Fan greatly reduces the turbulence caused by fan rotation, thus decreasing the noise and vibration while increasing the airflow.

    Powerful Cooling Performance

    Four heatpipes and aluminum fins are designed for maximum cooling while Shark`s Fin Blade Fan minimizes noise and cools not only the CPU but also provides powerful peripheral cooling.

    Slim Profile

    The CPU cooler`s height is 66mm and designed to be installed in ATX case as well as slim or LP (low profile) cases.

    Specifications

    Dimensions 
    108(L) X 108(W) X 66(H)mm
    Weight 
    330g
    Materials 
    Fins: Aluminum / Base: Copper
    Dissipation Area 
    2,872?
    Heatpipes 
    4 `c` Shaped Heatpipes
    Fan 
    4 Pin 92mm PWM Fan
    Fan RPM 
    1,400 ~ 2,800rpm ± 10 %
    Noise 
    20 ~ 32dBA ± 10 %
    Fan Bearing 
    FSB (Fluid Shield Bearing)
    Date Created: 14:29, 12-12-2018
    Product URL: https://www.pbtech.com/au/product/FANZAL20008/Zalman-CNPS8000B-CPU-cooler---height-is-66mm-and-d
    Your recently viewed items (1)
    Home PC Parts Cooling - Air CPU Coolers Zalman CNPS8000B CPU cooler - height is 66mm and...
    Customer Testimonials - See More