Teltonika RUT240 LTE CAT4 INDUSTRIAL CELLULAR ROUTER with Wi-Fi, Single Mini-SIM Slot, 1 x LAN, 1 x WAN (Antenna and Power included)

MOBILE

Mobile module

4G (LTE) - Cat 4 up to 150 Mbps, 3G - Up to 42 Mbps, 2G - Up to 236.8 kbps

Status

Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received

Bridge

Direct connection (bridge) between mobile ISP and device on LAN

SMS

SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

Black/White list (optional)

Operator black/white list

Multiple PDN (optional)

Possibility to use different PDNs for multiple network access and services

Band management

Band lock, Used band status display

WIRELESS

Wireless mode

IEEE 802.11b/g/n, Access Point (AP), Station (STA)

WiFi

WPA2-Enterprise (with external/internal Radius server), WPA2-PSK, WPA-PSK, WEP, MAC Filter

WiFi security

WPA2-Enterprise - PEAP, TLS, TTLS, AES-CCMP, TKIP, Auto Cipher modes, Client separation

SSID

SSID stealth mode and access control based on MAC address

WiFi users

Up to 50 simultaneous connections

Hotspot

Captive portal (Hotspot), internal/external Radius server, built in customizable landing page

ETHERNET

WAN

1 x WAN port (can be configured to LAN) 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

LAN

1 x LAN port, 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

NETWORK

Routing

Static routing, Dynamic routing (Optional - BGP, OSPF v2, RIP v1/v2)

Network protocols

TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPnP, SSH, DHCP, Telnet, SMNP, MQTT

VoIP passthrough support

H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

Connection monitoring

Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall

Port forward, traffic rules, custom rules

DHCP

Static and dynamic IP allocation, DHCP Relayd

QoS

Traffic priority queuing by source/destination, service, protocol or port, traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

DDNS

Supported >25 service providers, others can be configured manually

Network backup

VRRP, Mobile, Wired and WiFi WAN options, each of which can be used as backup, using automatic Failover

Load balancing

Balance your internet traffic over multiple WAN connections

NetSnapper (optional)

Mobile connection management, data compression VPN client (not available in standard FW)

SSHFS (optional)

Possibility to mount remote file system via SSH protocol (not available in standard FW)

SECURITY

Authentication

Pre-shared key, digital certificates, X.509 certificates

Firewall

Pre-configured firewall rules can be enabled via web-ui, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

Attack prevention

DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

WiFi security

WPA2-Enterprise - PEAP, EAP-TLS, TLS, TTLS. AES-CCMP, TKIP, Auto Cipher modes, Client separation

VLAN

Tag based VLAN separation

Mobile quota control

Set up custom data limits for the SIM card
WEB filter Blacklist for blocking out unwanted websites, whitelist for specifying allowed sites only

Access control

Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

OpenVPN

Multiple clients and server can be running simultaneously, 12 encryption methods

OpenVPN Encryption

DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC

IPsec

IKEv1, IKEv2, supports up to 4 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)

GRE

GRE tunnel

PPTP, L2TP

Client/Server services can run simultaneously

Stunnel

Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the programs' code

SSTP

SSTP client instance support

MONITORING & MANAGEMENT

WEB UI

HTTP/HTTPS, status, configuration, FW update, CLI ,troubleshoot, event log, system log, kernel log

FOTA

Firmware update from sever, automatic notification

SSH

SSH (v1, v2)

SMS

SMS status, SMS configuration, send/read SMS via HTTP POST/GET

TR-069 (optional)

OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVsystems

MQTT

MQTT Broker, MQTT publisher

SNMP

SNMP (v1, v2, v3), SNMP trap

JSON-RPC

Management API over HTTP/HTTPS

MODBUS

MODBUS TCP status/control

RMS

Teltonika Remote Management System (RMS)

SYSTEM CHARACTERISTICS

CPU

Atheros Hornet, MIPS 24Kc, 400 MHz

RAM

64 MB, DDR2

FLASH memory

16 MB SPI Flash

FIRMWARE / CONFIGURATION

WEB UI

Update FW from file, check FW on server, configuration profiles, configuration backup, restore point

FOTA

Update FW/configuration from server

RMS

Update FW/configuration for multiple devices

Keep settings

Update FW without losing current configuration

FIRMWARE CUSTOMIZATION

Operating system

RutOS (OpenWrt based Linux OS)

Supported languages

Busybox shell, Lua, C, C++

Development tools

GPL package with built environment provided

INPUT/OUTPUT

Input

1 x Digital Input

Output

1 x Digital Output

Events

SMS, EMAIL, RMS

POWER

Connector

4 pin industrial DC power socket

Input voltage range

9 - 30 VDC (4 pin industrial socket), reverse polarity protection, surge protection >33 VDC 10us max

PoE (passive)

Passive PoE over spare pairs (available from HW revision 0007 and batch number 0010). Possibility to power up through LAN port, not compatible with IEEE802.3af and 802.3at

Power consumption

< 5 W

PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)

Ethernet

2 x RJ45 ports, 10/100 Mbps

Status LEDs

3 x connection type status LEDs, 5 x connection strength LEDs, 2 x LAN status LEDs, 1x Power LED

SIM

1 x SIM slot (Mini SIM - 2FF), 1.8 V/3 V, external SIM holder

Power

4 pin DC connector with 1 x Digital input and 1 x Digital output

Anntenas

2 x SMA for LTE, 1 x RP-SMA for WiFi antenna connectors

Reset

Reset/restore to default button

PHYSICAL SPECIFICATION

Casing material

Aluminum housing, plastic panels

Dimensions

83 mm x 74 mm x 25 mm (H x W x D)

Weight

125 g

Mounting options

Bottom and sideways DIN rail mounting slots

OPERATING ENVIRONMENT

Operating temperature

-40 °C to 75 °C

Operating humidity

10% to 90% non-condensing

Ingress Protection Rating

IP30

MTBF

310000 h

REGULATORY & TYPE APPROVALS

Regulatory

CE/RED, FCC, IC/ISED, EAC, RCM, PTCRB, RoHS, WEEE, Wi-Fi Alliance (in progress)

Operator

Verizon, AT&T

Vehicle

ECE R10 (E-mark) (planned)

EMI IMMUNITY

Standards

Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0, Draft EN 301 489-52 V1.1.0
FCC 47 CFR Part 15B (2017), ANSI C63.4 (2014)

ESD

EN61000-4-2:2009

RS

EN 61000-4-3:2006 + A1:2008 + A2:2010

EFT

EN 61000-4-4:2012

Surge protection

EN 61000-4-5:2006

CS

EN 61000-4-6:2009

DIP

EN 61000-4-11:2004

RF

Standards

EN 300 328 V2.1.1, EN 301 511 V12.5.1, EN 301 908-1 V11.1.1, EN 301 908-2 V11.1.1, EN 301 908-13 V11.1.1
FCC 47 CFR Part 15C (2017), FCC 47 CFR Part 2 (2017), FCC 47 CFR Part 22H (2017), FCC 47 CFR Part 24E (2017), FCC 47 CFR Part 27C (2017)
RSS-Gen Issue 4 (2014), RSS-247 Issue 2 (2017), RSS-132 Issue 3 (2013), RSS-133 Issue 6 (2013), RSS-139 Issue 3, RSS-130 Issue 1
AS/CA S042.1:2018, AS/ACIF S042.3:2005, AS/CA S042.4:2018, AS/NZS 4268:2017

SAFETY

Standards

IEC 60950-1:2005 (Second Edition) + Am 1:2009 + Am 2:2013
AS/NZS 60950.1:2015
EN 50665:2017, EN 62311:2008
FCC 47 CFR Part 1 1.1310
RSS-102 Issue 5 (2015)