GIVE FEEDBACK
Welcome to PB Tech Australia. All prices shown are in $AUD and include GST.. All prices are in $AUD and include GST..

Generating Print Page

Ubiquiti 5GHz PowerBeam airMAX with 300mm Isolator Ring

Limited Supply - only stock on hand available, when sold out we may not be able to source this product again.

Ubiquiti 5GHz PowerBeam airMAX with 300mm Isolator Ring

  • Brand: Ubiquiti
  • MPN: PBE-M5-300-ISO
  • Part #: NETUBI1204
  • UPC:
  • Brand: Ubiquiti
  • MPN: PBE-M5-300-ISO
  • Part #: NETUBI1204
  • UPC:

Ethernet Ports

1

USB Ports

None

WiFi Bands

Single

Wireless Transmission Speed

Not Specified

Product is out of stock. View similar products in-stock at PB Tech

Features

Install the PBE-M5-300-ISO-US 1PK PowerBeam M5 ISO 5 GHz airMAX Bridge with RF Isolated Reflector from Ubiquiti Networks into a variety of network configurations including point-to-multipoint, wireless client, or point-to-point and take advantage of enhanced beamwidth technology. Combined with RF isolation to filter out noise, it delivers a cleaner and more reliable connection. Built-in airMAX technology utilizes the Time Division Multiple Access (TDMA) signal which breaks down the signal into specified time slots to reduce collisions. As a result, you receive reduced latency, noise immunity, and improved throughput.

- Atheros MIPS 74Kc, 560 MHz CPU
- 64MB RAM / 8MB Flash Memory
- 1 x 10/100 Ethernet Port
- Passive PoE Power Method
- 22 dBi Gain
- 5725-5850 MHz Operating Frequency
- Dual Linear Polarization
- Pole Mounting Kit Included

Improved Noise Immunity

The PowerBeam ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. With its combination of focused beam directivity, RF isolation, and QoS, the PowerBeam ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency.

Integrated Radio Design

Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Providing high performance and innovative mechanical design at a low cost, the PowerBeam ISO is versatile and cost-effective to deploy even at long distances.

airMAX Technology Included

Unlike standard Wi-Fi protocol, Ubiquiti's Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller. This time slot method eliminates hidden node collisions and maximizes airtime efficiency, so airMAX technology provides performance improvements in latency, noise immunity, scalability, and throughput compared to other outdoor systems in its class

airOS

airOS is a versatile, highly developed Ubiquiti firmware technology. It is intuitive and was designed to require no training to operate. Behind the user interface is a powerful firmware architecture, which enables high performance, outdoor multi-point networking. 

- Protocol Support
- Ubiquiti Channelization
- Spectral Width Adjustment
- ACK Auto-Timing
- AAP Technology
- Multi-Language Support

airView

Integrated on all Ubiquiti M products, airView provides advanced spectrum analyzer functionality: waterfall, waveform, and real-time spectral views allow operators to identify noise signatures and plan their networks to minimize noise interference.

- Waterfall Aggregate energy over time for each frequency.
- Waveform Aggregate energy collected.
- Real-time Energy is shown in real time as a function of frequency.
- Recording Automate airView to record and report results.

airControl

airControl is a powerful and intuitive, web-based server network management application, which allows operators to centrally manage entire networks of Ubiquiti devices.

- Network Map
- Monitor Device Status
- Mass Firmware Upgrade
- Web UI Access
- Manage Groups of Devices
- Task Scheduling

Innovative Mechanical Design

- Metal-plated interior of rear housing enhances RF shielding.
- Built-in mechanical tilt mounting bracket offers ±20° of tilt.
- Convenient pole mounting with a single wrench to mount the PowerBeam ISO on a pole.

Industrial-Strength Construction

- GEOMET-coated fasteners for improved corrosion resistance when compared with zinc-plated fasteners.
- Dish and brackets made of galvanized steel that are powder-coated for enhanced corrosion resistance.
- Protective radome shields protect the radio from nature's harsh elements.

RF Isolation

The integrated isolator design spatially filters out interference, so the PowerBeam ISO delivers improved noise immunity in co-location deployments.

Specifications

Processor 
Atheros MIPS 74Kc, 560 MHz

Memory 
64 MB DDR2, 8 MB flash

Networking Interface 
1 x 10/100 Ethernet port

Wireless Approvals 
FCC, IC, CE

RoHS Compliance 
Yes

Power Supply 
24 V, 0.5 A PoE

Power Method 
Passive PoE (Pairs 4, 5+; 7, 8 Return)

Voltage Range 
20-26 VDC

Power Consumption 
6 W (max.)

Gain 
22 dBi

Operating Frequency 
5170 - 5875 MHz

Wind Loading 
47 lbf @ 125 mph (210 N @ 200 km/h)

Wind Survivability 
125 mph (200 km/h)

LEDs 
1 x Power
1 x LAN
4 x WLAN

Signal Strength LEDs 
Software-adjustable to correspond to custom RSSI levels

Channel Sizes 
5/8/10/20/30/40 MHz

Polarization 
Dual Linear

Enclosure 
Outdoor UV stabilized plastic

Mounting 
Pole-mounted kit included

ESD/EMP Protection 
Air: ± 24 kV
Contact: ± 24 kV

Operating Temperature:
-40 to 158°F / -40 to 70°C

Operating Humidity:
5 to 95% non-condensing

Salt Fog Test 
IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5

Vibration Test 
IEC 68-2-6

Temperature Shock Test 
IEC 68-2-14

UV Test 
IEC 68-2-5 at 104° F (40° C), Equivalent: ETS 300 019-1-4

Built-In Mechanical Downtilt 
±20°

Dimensions 
14.33 x 14.33 x 10.87" / 364 x 364 x 276 mm

Weight 
5.62 lb / 2.55 kg

Manufacturer Part No:
PBE-M5-300-ISO
Brand:
Product Type:
-
UPC
-
Product Family:
-
Shipping Weight:
1 kg
PB Part No:
NETUBI1204
Product Model:
-
Warranty: 12 months *
* Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
All warranties are return to base unless otherwise specified.

Reviews

There are currently no reviews for this product

Do you own this product?

Write a review and go into the monthly draw Win A $100 PB Tech Gift Card!

Delivery & Pick-up

Learn more about delivery time-frames over Christmas and the New Year period.

Shipping Costs

Shipping costs vary based on your location and the items being shipped and in some cases shipping may even be FREE.

To calculate what the shipping costs will be for your order, add the items you are interested in to your cart, view the Shopping Cart page, and select your 'Delivery Area' to calculate the shipping cost.

Shipping Security and Insurance

All orders shipped by PB Tech are sent via a courier with a signature required for each delivery. In some cases, and only where you have given the courier company permission to leave orders at a designated location, your order may be delivered without requiring a signature. All orders sent by PB Tech are fully insured in the unlikely event that your item(s) are damaged or go missing in transit.

Delivery Estimates

The delivery time-frame (in days) for each product we sell is detailed on the individual product page just to the right of the main product image. From when you place your order, in-stock products typically arrive within 2-4 working days for NSW, VIC, ACT and QLD deliveries and 4-8 working days for all other states in Australia.

Overseas Shipments

If you are located in New Zealand, you can order directly from our New Zealand site www.pbtech.co.nz. If you are from another country you can order from www.pbtech.com

Returns & Warranty

7 day right of exchange

If you change your mind after making a purchase, or realise you have ordered the incorrect item, you can enjoy the peace of mind that we offer a 7 day exchange policy.

To exchange a product, goods must be sealed / unopened, with packaging in original condition, and accompanied by a valid receipt dated no more than 7 calendar days from when you request an exchange.

If there is not a suitable product that can be exchanged for your returned item you will be offered a credit on your account or gift card based on the value paid at the time of purchase.

Please note, items purchased on finance cannot be exchanged for a gift card.

 

Hassle free warranty service

If your product develops a fault within the manufacturer warranty period, you need to fill out our request a return form.

If your product develops a fault outside of the manufacturer warranty or PB Tech warranty period, we offer a full repair service and are an authorised repair agent for leading brands such as Samsung, HP, Toshiba, Lenovo and more.

 

Returning a product / making a warranty claim

To return a product to PB Tech, please complete our request a return form.

Or view our returns policy for more information.

Ubiquiti 5GHz PowerBeam airMAX with 300mm Isolator Ring

  • Brand: Ubiquiti
  • MPN: PBE-M5-300-ISO
  • Part #: NETUBI1204
$136.65 Excluding GST $150.32 Including GST

Date Created: 03:11, 25-04-2024
Product URL: https://www.pbtech.com/au/product/NETUBI1204/Ubiquiti-5GHz-PowerBeam-airMAX-with-300mm-Isolator?qr=country-selector

Features

Install the PBE-M5-300-ISO-US 1PK PowerBeam M5 ISO 5 GHz airMAX Bridge with RF Isolated Reflector from Ubiquiti Networks into a variety of network configurations including point-to-multipoint, wireless client, or point-to-point and take advantage of enhanced beamwidth technology. Combined with RF isolation to filter out noise, it delivers a cleaner and more reliable connection. Built-in airMAX technology utilizes the Time Division Multiple Access (TDMA) signal which breaks down the signal into specified time slots to reduce collisions. As a result, you receive reduced latency, noise immunity, and improved throughput.

- Atheros MIPS 74Kc, 560 MHz CPU
- 64MB RAM / 8MB Flash Memory
- 1 x 10/100 Ethernet Port
- Passive PoE Power Method
- 22 dBi Gain
- 5725-5850 MHz Operating Frequency
- Dual Linear Polarization
- Pole Mounting Kit Included

Improved Noise Immunity

The PowerBeam ISO directs RF energy in a tighter beamwidth, and its integrated isolator design improves RF isolation to spatially filter out interference. With its combination of focused beam directivity, RF isolation, and QoS, the PowerBeam ISO blocks noise to improve noise immunity. This is especially important in an area crowded with other RF signals of the same or similar frequency.

Integrated Radio Design

Ubiquiti's InnerFeed technology integrates the radio into the feedhorn of an antenna, so there is no need for a cable. This improves performance because it eliminates cable losses. Providing high performance and innovative mechanical design at a low cost, the PowerBeam ISO is versatile and cost-effective to deploy even at long distances.

airMAX Technology Included

Unlike standard Wi-Fi protocol, Ubiquiti's Time Division Multiple Access (TDMA) airMAX protocol allows each client to send and receive data using pre-designated time slots scheduled by an intelligent AP controller. This time slot method eliminates hidden node collisions and maximizes airtime efficiency, so airMAX technology provides performance improvements in latency, noise immunity, scalability, and throughput compared to other outdoor systems in its class

airOS

airOS is a versatile, highly developed Ubiquiti firmware technology. It is intuitive and was designed to require no training to operate. Behind the user interface is a powerful firmware architecture, which enables high performance, outdoor multi-point networking. 

- Protocol Support
- Ubiquiti Channelization
- Spectral Width Adjustment
- ACK Auto-Timing
- AAP Technology
- Multi-Language Support

airView

Integrated on all Ubiquiti M products, airView provides advanced spectrum analyzer functionality: waterfall, waveform, and real-time spectral views allow operators to identify noise signatures and plan their networks to minimize noise interference.

- Waterfall Aggregate energy over time for each frequency.
- Waveform Aggregate energy collected.
- Real-time Energy is shown in real time as a function of frequency.
- Recording Automate airView to record and report results.

airControl

airControl is a powerful and intuitive, web-based server network management application, which allows operators to centrally manage entire networks of Ubiquiti devices.

- Network Map
- Monitor Device Status
- Mass Firmware Upgrade
- Web UI Access
- Manage Groups of Devices
- Task Scheduling

Innovative Mechanical Design

- Metal-plated interior of rear housing enhances RF shielding.
- Built-in mechanical tilt mounting bracket offers ±20° of tilt.
- Convenient pole mounting with a single wrench to mount the PowerBeam ISO on a pole.

Industrial-Strength Construction

- GEOMET-coated fasteners for improved corrosion resistance when compared with zinc-plated fasteners.
- Dish and brackets made of galvanized steel that are powder-coated for enhanced corrosion resistance.
- Protective radome shields protect the radio from nature's harsh elements.

RF Isolation

The integrated isolator design spatially filters out interference, so the PowerBeam ISO delivers improved noise immunity in co-location deployments.

Specifications

Processor 
Atheros MIPS 74Kc, 560 MHz

Memory 
64 MB DDR2, 8 MB flash

Networking Interface 
1 x 10/100 Ethernet port

Wireless Approvals 
FCC, IC, CE

RoHS Compliance 
Yes

Power Supply 
24 V, 0.5 A PoE

Power Method 
Passive PoE (Pairs 4, 5+; 7, 8 Return)

Voltage Range 
20-26 VDC

Power Consumption 
6 W (max.)

Gain 
22 dBi

Operating Frequency 
5170 - 5875 MHz

Wind Loading 
47 lbf @ 125 mph (210 N @ 200 km/h)

Wind Survivability 
125 mph (200 km/h)

LEDs 
1 x Power
1 x LAN
4 x WLAN

Signal Strength LEDs 
Software-adjustable to correspond to custom RSSI levels

Channel Sizes 
5/8/10/20/30/40 MHz

Polarization 
Dual Linear

Enclosure 
Outdoor UV stabilized plastic

Mounting 
Pole-mounted kit included

ESD/EMP Protection 
Air: ± 24 kV
Contact: ± 24 kV

Operating Temperature:
-40 to 158°F / -40 to 70°C

Operating Humidity:
5 to 95% non-condensing

Salt Fog Test 
IEC 68-2-11 (ASTM B117), Equivalent: MIL-STD-810 G Method 509.5

Vibration Test 
IEC 68-2-6

Temperature Shock Test 
IEC 68-2-14

UV Test 
IEC 68-2-5 at 104° F (40° C), Equivalent: ETS 300 019-1-4

Built-In Mechanical Downtilt 
±20°

Dimensions 
14.33 x 14.33 x 10.87" / 364 x 364 x 276 mm

Weight 
5.62 lb / 2.55 kg

Date Created: 03:11, 25-04-2024
Product URL: https://www.pbtech.com/au/product/NETUBI1204/Ubiquiti-5GHz-PowerBeam-airMAX-with-300mm-Isolator?qr=country-selector