GIVE FEEDBACK

Generating Print Page

Raspberry Pi Adafruit RGB Negative 16 x 2 LCD + Keypad Kit for Raspberry Pi

Normally $60.00
Normally $66.00
You save 5%
You save 5%
$ 56 .67
 +GST
$ 62 .34
 inc GST
$56.67  +GST
$62.34  inc GST

Raspberry Pi Adafruit RGB Negative 16 x 2 LCD + Keypad Kit for Raspberry Pi

Normally $60.00
Normally $66.00
You save 5%
You save 5%
PB Tech price
$ 56 .67 $ 62 .34
 +GST  inc GST


Delivery: Order now and it ships on 03 May
Estimated Delivery Times
NSW, VIC, ACT, QLD - Within 4-8 working days
SA, WA, TAS, NT - Within 8-12 working days

View all shipping info
$56.67  +GST
$62.34  inc GST

Six easy payments of $10.39 per week*

Laybuy lets you spread the cost of your purchase over 6, interest-free, weekly payments.

Click the button below or select Laybuy as your payment method during the checkout process.

If you do not have a Laybuy account you will be able to create one at checkout.

*Repayments shown above are indicative only and may vary. Ts and Cs and lending criteria apply.

Learn more about Laybuy

Features

1110 is a RGB negative 16 x 2 LCD plus keypad kit for Raspberry Pi. It makes easier for user to get these LCD into projects, as its devised with a Pi plate that lets to control a 16 x 2 character LCD, up to 3 backlight pins AND 5 keypad pins using only the two I2C pins on the R-Pi. The best part is user don't really lose those two pins either, since can be used to stick i2c based sensors, RTCs, etc and have them share the I2C bus. This is a super slick way to add a display without all the wiring hassle. This pi plate is perfect for when its used to build as a stand alone project with its own user interface. The 4 directional buttons plus select button allows basic control without having to attach a bulky computer. The plate is designed for both Revision 1 and Revision 2 Raspberry Pi's. It uses the I2C (SDA/SCL) pins.                                                       

- MCP23017 i2c port expander chip helps to use only 2 R-Pi pins to run the entire LCD and buttons
- Tactile switch pushbuttons used in the UP, DOWN, LEFT, RIGHT and SELECT locations on the PCB.
- 10k trim potentiometer
- Strip of 36 male header pins is used to attach the LCD to the PCB
- Extra tall 26 pin female header for plugging into the Pi
- Handy Python code to help user to easily communicate to the LCD and buttons

WARNING: If you're using the new Raspberry Pi model B+ with 4 USB ports you will need to take some extra steps to ensure the backlight resistor leads do not touch the USB ports and short out.

Specifications

Compatibility
Raspberry Pi

Contents
16x2 character RGB negative LCD
Resistors
Potentiometer
Pushbuttons
I2C port expander chip
Male header pins
PCB
Raspberry Pi plate header
Bumper

Manufacturer Part No:
2279958
Brand:
Product Type:
-
UPC
-
Product Family:
-
Shipping Weight:
0.08 kg
PB Part No:
SEVRBP0043
Product Model:
-
Warranty: 12 months *
* Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
All warranties are return to base unless otherwise specified.

Reviews

There are currently no reviews for this product

Do you own this product?

Write a review and go into the monthly draw Win A $100 PB Tech Gift Card!

Delivery & Pick-up

Learn more about delivery time-frames over Christmas and the New Year period.

Shipping Costs

Shipping costs vary based on your location and the items being shipped and in some cases shipping may even be FREE.

To calculate what the shipping costs will be for your order, add the items you are interested in to your cart, view the Shopping Cart page, and select your 'Delivery Area' to calculate the shipping cost.

Shipping Security and Insurance

All orders shipped by PB Tech are sent via a courier with a signature required for each delivery. In some cases, and only where you have given the courier company permission to leave orders at a designated location, your order may be delivered without requiring a signature. All orders sent by PB Tech are fully insured in the unlikely event that your item(s) are damaged or go missing in transit.

Delivery Estimates

The delivery time-frame (in days) for each product we sell is detailed on the individual product page just to the right of the main product image. From when you place your order, in-stock products typically arrive within 2-4 working days for NSW, VIC, ACT and QLD deliveries and 4-8 working days for all other states in Australia.

Overseas Shipments

If you are located in New Zealand, you can order directly from our New Zealand site www.pbtech.co.nz. If you are from another country you can order from www.pbtech.com

Returns & Warranty

7 day right of exchange

If you change your mind after making a purchase, or realise you have ordered the incorrect item, you can enjoy the peace of mind that we offer a 7 day exchange policy.

To exchange a product, goods must be sealed / unopened, with packaging in original condition, and accompanied by a valid receipt dated no more than 7 calendar days from when you request an exchange.

If there is not a suitable product that can be exchanged for your returned item you will be offered a credit on your account or gift card based on the value paid at the time of purchase.

Please note, items purchased on finance cannot be exchanged for a gift card.

 

Hassle free warranty service

If your product develops a fault within the manufacturer warranty period, you need to fill out our request a return form.

If your product develops a fault outside of the manufacturer warranty or PB Tech warranty period, we offer a full repair service and are an authorised repair agent for leading brands such as Samsung, HP, Toshiba, Lenovo and more.

 

Returning a product / making a warranty claim

To return a product to PB Tech, please complete our request a return form.

Or view our returns policy for more information.

Raspberry Pi Adafruit RGB Negative 16 x 2 LCD + Keypad Kit for Raspberry Pi

$56.67 Excluding GST $62.34 Including GST

Date Created: 15:41, 29-03-2024
Product URL: https://www.pbtech.com/au/product/SEVRBP0043/Raspberry-Pi-Adafruit-RGB-Negative-16-x-2-LCD--Key?qr=country-selector&qr=country-selector

Features

1110 is a RGB negative 16 x 2 LCD plus keypad kit for Raspberry Pi. It makes easier for user to get these LCD into projects, as its devised with a Pi plate that lets to control a 16 x 2 character LCD, up to 3 backlight pins AND 5 keypad pins using only the two I2C pins on the R-Pi. The best part is user don't really lose those two pins either, since can be used to stick i2c based sensors, RTCs, etc and have them share the I2C bus. This is a super slick way to add a display without all the wiring hassle. This pi plate is perfect for when its used to build as a stand alone project with its own user interface. The 4 directional buttons plus select button allows basic control without having to attach a bulky computer. The plate is designed for both Revision 1 and Revision 2 Raspberry Pi's. It uses the I2C (SDA/SCL) pins.                                                       

- MCP23017 i2c port expander chip helps to use only 2 R-Pi pins to run the entire LCD and buttons
- Tactile switch pushbuttons used in the UP, DOWN, LEFT, RIGHT and SELECT locations on the PCB.
- 10k trim potentiometer
- Strip of 36 male header pins is used to attach the LCD to the PCB
- Extra tall 26 pin female header for plugging into the Pi
- Handy Python code to help user to easily communicate to the LCD and buttons

WARNING: If you're using the new Raspberry Pi model B+ with 4 USB ports you will need to take some extra steps to ensure the backlight resistor leads do not touch the USB ports and short out.

Specifications

Compatibility
Raspberry Pi

Contents
16x2 character RGB negative LCD
Resistors
Potentiometer
Pushbuttons
I2C port expander chip
Male header pins
PCB
Raspberry Pi plate header
Bumper

Date Created: 15:41, 29-03-2024
Product URL: https://www.pbtech.com/au/product/SEVRBP0043/Raspberry-Pi-Adafruit-RGB-Negative-16-x-2-LCD--Key?qr=country-selector&qr=country-selector