Cooler Master MasterBox MB400L TG mATX Mini Tower Case for mATX /ITX ,CPU Cooler Supports Upto 166mm, GPU Supports Upto 344mm, 4 X PCI Slots, 280mm Radiator Supported, Front: 2XUSB 3.0, NO PSU

Has a glass side panel, front panel removable, 1 case fan inc, cables and screws. Side note to install the hdd you need to install it at the bottom inside a small box with screw holes, for the ssd you will need to use the rubber thing that was included with the case, either on the metal side of the panel or under the mobo.it will be on the manual. good budget quality case. Has a glass side panel, front panel removable, 1 case fan inc, cables and screws. Side note to install the hdd you need to install it at the bottom inside a small box with screw holes, for the ssd you will need to use the rubber thing that was included with the case, either on the metal side of the panel or under the mobo.it will be on the manual. good budget quality case.

Case looks very clean and is affordable. Also comes with motherboard standoffs already installed so it’s easy to work with. Case looks very clean and is affordable. Also comes with motherboard standoffs already installed so it’s easy to work with.

Great price for the type of case im looking for however interms of intake the front lacks any mesh other than small strips that run down the sides and while the seperate bay for the power supply makes it look super tidy it does make it so the GPU does not have any fresh air to use. to keep my gpu cool I need 3 intake fans on the front. Build quality is pretty decent although you can feel in some places its not too solid.

For an MATX build its the perfect size and makes the case look full when using an matx board. Great price for the type of case im looking for however interms of intake the front lacks any mesh other than small strips that run down the sides and while the seperate bay for the power supply makes it look super tidy it does make it so the GPU does not have any fresh air to use. to keep my gpu cool I need 3 intake fans on the front. Build quality is pretty decent although you can feel in some places its not too solid.

For an MATX build its the perfect size and makes the case look full when using an matx board.

Solid build with adequate room for cable management.
Enjoying the Cooler Master brand lately. Solid build with adequate room for cable management.
Enjoying the Cooler Master brand lately.

It has worked really good so far and is good for the price It has worked really good so far and is good for the price

It was my first time building a PC, and for all intents and purposes its a great case. Being able to see all the components inside's cool asf It was my first time building a PC, and for all intents and purposes its a great case. Being able to see all the components inside's cool asf

Pretty easy case to build in, definitely recommended Pretty easy case to build in, definitely recommended

Great case for the cost, supports big 140mm fans in the front and top, has a magnetic dust filter and looks great. Spacious interior, fits 3-slot full length GPUs with tons of room to breathe. Great case for the cost, supports big 140mm fans in the front and top, has a magnetic dust filter and looks great. Spacious interior, fits 3-slot full length GPUs with tons of room to breathe.

This case is the perfect size to sit on my l-shaped desk (with a triple monitor setup).

The back panel pci slots need to be broken out and this can leave the in-between metal a bit bent so take care.

I have installed 3 x 120mm fans in the front of the case plus a 240mm radiator at the top. It's a bit of a squish but with good cable management it's looks and performs fine.

With a larger PSU you may need to ditch the drive cage. This is a pity however it is a mATX case and with a good choice of MB you won't need the cage anyway. A MB with 2 X M.2 should see you right.

Very happy with purchase. This case is the perfect size to sit on my l-shaped desk (with a triple monitor setup).

The back panel pci slots need to be broken out and this can leave the in-between metal a bit bent so take care.

I have installed 3 x 120mm fans in the front of the case plus a 240mm radiator at the top. It's a bit of a squish but with good cable management it's looks and performs fine.

With a larger PSU you may need to ditch the drive cage. This is a pity however it is a mATX case and with a good choice of MB you won't need the cage anyway. A MB with 2 X M.2 should see you right.

Very happy with purchase.

Decent looking case for the price, the back PCIe slots cannot be screwed back. When removing them, it can bend the case quite a bit.
Cable management is also not very easy in this case unless you don't use the drive cage.
Airflow is average, the stock fan that mine came with made a little buzzing noise so I had to replace it Decent looking case for the price, the back PCIe slots cannot be screwed back. When removing them, it can bend the case quite a bit.
Cable management is also not very easy in this case unless you don't use the drive cage.
Airflow is average, the stock fan that mine came with made a little buzzing noise so I had to replace it

Top tier case for the price cant beat it. Top tier case for the price cant beat it.

Great price , nice looking case , plenty of room for cable management
Nice glass window , removable hdd cage ,

No cons really Great price , nice looking case , plenty of room for cable management
Nice glass window , removable hdd cage ,

No cons really