Lian Li O11D MINI ATX MidTower Gaming Case Tempered Glass, CPU Cooler Supports Upto 172mm, GPU Supports Upto 395mm, 7x PCI Slot, 360mm Radiator Supported, SFX/ SFX-L PSU required, Front I/O: 1x Type C, 2x USB, HD Audio

Putting the fully modular aspect aside, I found this case to be quite a challenge to build in.

The case itself is well made and well packaged. I found some of the modular screws to be super tight almost as if they were fitted while the paint was still drying. The box of spare screws comes in handy in case one gets damaged during the initial unscrew.

Requiring a small form factor (SFX) power supply unit wasn't a big deal. They are readily available, costing a little more than an standard sized PSU. You could fit two SFX power supplies by removing the hard drive bay, if you were to say, run duel 3090's in some sort of SLI config.

I ...view more Putting the fully modular aspect aside, I found this case to be quite a challenge to build in.

The case itself is well made and well packaged. I found some of the modular screws to be super tight almost as if they were fitted while the paint was still drying. The box of spare screws comes in handy in case one gets damaged during the initial unscrew.

Requiring a small form factor (SFX) power supply unit wasn't a big deal. They are readily available, costing a little more than an standard sized PSU. You could fit two SFX power supplies by removing the hard drive bay, if you were to say, run duel 3090's in some sort of SLI config.

I was hoping there was more room to fit a radiator to the top of the case when using a full size ATX motherboard. Or even room for a 360mm radiator mounted to the side. Unfortunately 280 is the biggest that can go side mounted with 360 only available at the bottom of the case when using a full ATX motherboard, obviously not suitable for an AIO. that aside you can fit 360mm worth of fans on the top as long as its only fans you want to place there.

The cable management is fantastic. Best I have dealt with! You would only be let down by the cables that come with your PSU. and they can always be changed out to custom made cables.
In order vertical mount your GPU, like everything based on this case, you need to buy an expensive bracket designed especially for this case (available at PB tech) which is available in both PCI-e gen 3 and 4. That aside, this is a future proofed case that will probably outlast the next couple of CPU/MB upgrades you will no doubt be purchasing in the future.

I want to keep with a particular theme while using the Lian Li UNI fans for more ARGB control but the finished product will come at a considerable cost. But if your buying this case to make an incredibly beautiful machine, then that's going to cost you. Just perhaps more than you think.

Overall, I feel this case would be suited an MATX build to ensure you have room at the top of the case for a radiator. This case when coupled with the right fans and water cooling config would be the last case you would ever need to buy.

Apart from its stunning looks (especially with any type of lighting in it) and its fully modular design it was a very good case to build in, also the cable management was great as if your lazy like me you can do minimal cable managing at the back of the case and just zip tie it to stuff. Don't let the idea of having to use a smaller power supply fool you as there are many available, however it is quite a wide case so if your desk is small and doesn't have much space even if it does have a look at the dimensions to see if they will fit your desk or where ever your putting it. Overall one of the best cases on the market in my opinion. Apart from its stunning looks (especially with any type of lighting in it) and its fully modular design it was a very good case to build in, also the cable management was great as if your lazy like me you can do minimal cable managing at the back of the case and just zip tie it to stuff. Don't let the idea of having to use a smaller power supply fool you as there are many available, however it is quite a wide case so if your desk is small and doesn't have much space even if it does have a look at the dimensions to see if they will fit your desk or where ever your putting it. Overall one of the best cases on the market in my opinion.

I love this case, not only can it fit normal parts it is small enough to save space on my desk. Love the all white as well! The only thing I’d say when buying this case is to make sure you get a smaller power supply like an SFX as the normal ones dont fit. I love this case, not only can it fit normal parts it is small enough to save space on my desk. Love the all white as well! The only thing I’d say when buying this case is to make sure you get a smaller power supply like an SFX as the normal ones dont fit.

It's compact but it has penalty of space for your build. Good quality and rigid. the only side back is you have to provide a sfx power supply It's compact but it has penalty of space for your build. Good quality and rigid. the only side back is you have to provide a sfx power supply

The color of white is jsut perfect, cant find any other in the market right now. The color of white is jsut perfect, cant find any other in the market right now.

This case is great for any mobo size(ATX, mATX, ITX), the white aesthetic looks clean for white builds. Only thing is an SFX power supply is needed. This case is great for any mobo size(ATX, mATX, ITX), the white aesthetic looks clean for white builds. Only thing is an SFX power supply is needed.

Cases like this that have intake on the bottom have the best optimization in terms of airflow. Good for both air and water cooling. Cases like this that have intake on the bottom have the best optimization in terms of airflow. Good for both air and water cooling.

By: TogisalaM 09/01/23

Verified Owner

Very good high quality case that I found very easy to build in as a first time pc builder Very good high quality case that I found very easy to build in as a first time pc builder