Loctek Pro Mount, 32"-60" Full Motion TV Wall Mount, - Max Load 30 kg - Max VESA 400x400mm - Tilt Angle -2 +12deg - Swivel -45 +45deg. - TV To Wall 56-465mm - 5 Years Warranty

Used for a 55" TV weighing around 13kg.

Pros: Nice sturdy frame, easy to position TV at the desired angle. Easy enough to install. Seems like a good variety of screws are included in the pack.
Cons: Sits vertically on the stud, so it may not be in the exact position preferred. Plastic caps are fairly flimsy and come off easily, but these are not visible once TV is mounted. Used for a 55" TV weighing around 13kg.

Pros: Nice sturdy frame, easy to position TV at the desired angle. Easy enough to install. Seems like a good variety of screws are included in the pack.
Cons: Sits vertically on the stud, so it may not be in the exact position preferred. Plastic caps are fairly flimsy and come off easily, but these are not visible once TV is mounted.

The description is incorrect. It implies there is an NZ specific 600mm wall plate provided for NZ stud 600mm stud spacing. This is not the case. This fits on a single stud. Therefore, if your stud is not centred where you want your TV I would not recommend this product. The description is incorrect. It implies there is an NZ specific 600mm wall plate provided for NZ stud 600mm stud spacing. This is not the case. This fits on a single stud. Therefore, if your stud is not centred where you want your TV I would not recommend this product.

Please it had the bolts in the box, made install easy Please it had the bolts in the box, made install easy

Chose this bracket over another suggested by PB Tech due to a reference that works for NZ studs - but in the end don't think it mattered. But happy with it. Works fine with a 55" LED TV. Not sure about heavier TV's though. There are some plastic end caps that are tacky and fall off if touched but probably not needed and can't be seen behind TV and don't fall off while in use, just a pain if knocked during install. Chose this bracket over another suggested by PB Tech due to a reference that works for NZ studs - but in the end don't think it mattered. But happy with it. Works fine with a 55" LED TV. Not sure about heavier TV's though. There are some plastic end caps that are tacky and fall off if touched but probably not needed and can't be seen behind TV and don't fall off while in use, just a pain if knocked during install.

Easy to mount on the wall and has all the bases covered in terms of types of walls and tv mounting differences. It seems sturdy enough for my needs. The two plastic covers on the side of the wide horizontal metal plate are a bit flimsier than the other plastic covers and don't attach properly to the metal plate, but once the TV is up they are behind it so not a major issue for me. Easy to mount on the wall and has all the bases covered in terms of types of walls and tv mounting differences. It seems sturdy enough for my needs. The two plastic covers on the side of the wide horizontal metal plate are a bit flimsier than the other plastic covers and don't attach properly to the metal plate, but once the TV is up they are behind it so not a major issue for me.

This is an awesome bracket! i mounted my 55inch and is has minimal sag when All the way to one side. Would work best with Entertainment box so tv can get rught back to the wall ! This is an awesome bracket! i mounted my 55inch and is has minimal sag when All the way to one side. Would work best with Entertainment box so tv can get rught back to the wall !

Works well and a well made product. However it does drop down a bit with a 55" TV on it. TV weighed 23Kg. Not enough adjustment on the -ve part of the tilt to make the TV 100% level. Works well and a well made product. However it does drop down a bit with a 55" TV on it. TV weighed 23Kg. Not enough adjustment on the -ve part of the tilt to make the TV 100% level.

Used for a 55" TV
Single stud mount which is what i needed.
No issues with the install. Used for a 55" TV
Single stud mount which is what i needed.
No issues with the install.

… that does what it says on the tin … that does what it says on the tin

Pro:
- Sturdy
- Comes with all the screws and fittings you could possibly need
- Inexpensive

Con:
The shroud that covers the screws also prevents the mount from pivoting all the way to the left/right side ( my studs weren’t in the ideal location). Pro:
- Sturdy
- Comes with all the screws and fittings you could possibly need
- Inexpensive

Con:
The shroud that covers the screws also prevents the mount from pivoting all the way to the left/right side ( my studs weren’t in the ideal location).

By: KyleC8 27/07/20

Verified Owner

Does the job perfectly. Does the job perfectly.

Affordable TV bracket thats easy to set up and install, only needed a couple of tools (level, drill, screwdriver). Affordable TV bracket thats easy to set up and install, only needed a couple of tools (level, drill, screwdriver).