GIVE FEEDBACK
Welcome to PB Tech Global. All prices shown are in $AUD. All prices are in $AUD.

Generating Print Page

Raspberry Pi Official Camera Module 3 Updated Version from Camera Module 2, Build-In 12M Pixel Sony IMX708 Image Sensor Module

PB Tech price
PB Tech price
AUD $ 40 .88
$ 40 .88
$40.88  +GST
$40.88

Raspberry Pi Official Camera Module 3 Updated Version from Camera Module 2, Build-In 12M Pixel Sony IMX708 Image Sensor Module

PB Tech price
AUD $ 40 .88 $ 40 .88


Delivery: Order now and it ships on 10 Jan
Estimated Delivery Times
7 - 10 working days for international destinations

View all shipping info
$40.88  +GST
$40.88

Case Colour

N/A

Memory Size

N/A

PSU Colour

N/A

Similar in-stock products available at PB Tech right now

Features


The Raspberry Pi Camera Module 3 is the latest entry in the mainstream RPi camera line-up, and the successor to the popular Camera Module 2. Built around a 12-megapixel Sony IMX708 image sensor module, Camera Module 3 offers a few key enhancements over its predecessor. Improved low-light sensitivity makes for better photos and output in situations where there's not a lot of light. The module also features powered autofocus making it easier to get a sharp picture output. Finally the Camera Module 3 features High Dynamic Range (HDR) support expanding the range of color and contrast in the output.

 - Back-illuminated, stacked CMOS 12-megapixel Sony IMX708 image sensor
 - High signal-to-noise ratio (SNR)
 - Built-in 2D Dynamic Defect Pixel Correction (DPC)
 - Phase Detection Autofocus (PDAF) for rapid autofocus
 - QBC Re-mosaic function
 - HDR mode (up to 3 megapixel output)
 - CSI-2 serial data output
 - 2-wire serial communication (supports I2C fast mode and fast mode plus)
 - 2-wire serial control of focus mechanism

Not just for stills

Camera Module 3 can record full HD video at 50fps, with higher frame rates available at lower resolutions. Featuring an HDR mode and autofocus, it not only provides great stills quality, but is also a fantastic tool for video recording and streaming. Watch our video filmed entirely on Camera Module 3 to see it in action.

For developers. Learn more about libcamera

Camera Module 3 takes advantage of the Raspberry Pi Open Source Camera System powered by libcamera. This rich set of libraries gives developers precise control over image processing and better access to the internals of Camera Module 3.

For beginners. Learn more about Picamera2

The latest version of Raspberry Pi OS comes pre-installed with a beta of Picamera2, a Python library developed here at Raspberry Pi in Cambridge. For beginners and advanced users alike, Picamera2 is perfect for everything from home projects to machine learning applications.

Documentation. Camera Module 3 documentation

From hardware schematics to software configuration, developers and users can find all the information they need about Camera Module 3 in our extensive and detailed documentation.

Documents:

Raspberry Pi Camera Module 3 product brief
Raspberry Pi Camera Module 3 Standard mechanical drawing
Raspberry Pi Camera Module 3 Wide mechanical drawing

Shot on Camera Module 3

Specifications

Sensor

Back-illuminated, stacked CMOS 12-megapixel Sony IMX708 image sensor

Resolution:

11.9 megapixels

Sensor size:

7.4mm sensor diagonal

Pixel size:

1.4µm x 1.4µm

Horizontal/vertical:

4608 x 2592 pixels

Diagonal field of view:

75 degrees (Camera Module 3, Camera Module 3 NoIR), 120 degrees (Camera Module 3 Wide, Camera Module 3 NoIR Wide)

Common video modes:

1080p50, 720p100, 480p120

Output:

RAW10

IR cut filter:

Integrated in standard variants; not present in NoIR variants

Dimensions:

25 x 24 x 11.5mm (12.4mm height for Wide variants)

Ribbon cable length:

140mm

Cable connector:

15 x 1mm FPC

Includes:

Raspberry Pi Camera Module 3
150mm CSI cable

Cable compatibility:

All models of Raspberry Pi Zero require a Raspberry Pi Zero camera cable to connect to the Raspberry Pi Camera Module; the standard cable supplied with the camera is not compatible with the smaller Raspberry Pi Zero camera connector. Suitable cables are supplied with the Raspberry Pi Zero Case.

Manufacturer Part No:
SC0872
Brand:
Product Type:
-
UPC
-
Product Family:
Official
Shipping Weight:
0.1 kg
PB Part No:
SEVRBP0396
Product Model:
Camera Module 3
Warranty: 12 months *
* Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
All warranties are return to base unless otherwise specified.

Reviews

There are currently no reviews for this product

Do you own this product?

Write a review and go into the monthly draw Win A $100 PB Tech Gift Card!

Accessories

Delivery & Pick-up

Shipping Costs

Shipping costs vary based on your location and the items being shipped and in some cases shipping may even be FREE.

To calculate what the shipping costs will be for your order, add the items you are interested in to your cart, view the Shopping Cart page, and select your 'Delivery Area' to calculate the shipping cost.

Shipping Security & Insurance

All orders shipped by PB Tech are sent via a courier with a signature required for each delivery. In some cases, and only where you have given the courier company permission to leave orders at a designated location, your order may be delivered without requiring a signature. All orders sent by PB Tech are fully insured in the unlikely event that your item(s) are damaged or go missing in transit.

Delivery Estimates

The delivery time-frame (in days) for each product we sell is detailed on the individual product page just to the right of the main product image. From when you place your order, in-stock products typically arrive within 7-10 working days for all countries that we ship to.

Overseas Shipments

If you are located in New Zealand, you can order directly from our New Zealand site www.pbtech.co.nz. If you are located in Australia you can order directly from our Australian website www.pbtech.com/au

Returns & Warranty

7 day right of exchange

If you change your mind after making a purchase, or realise you have ordered the incorrect item, you can enjoy the peace of mind that we offer a 7 day exchange policy.

To exchange a product, goods must be sealed / unopened, with packaging in original condition, and accompanied by a valid receipt dated no more than 7 calendar days from when you request an exchange.

If there is not a suitable product that can be exchanged for your returned item you will be offered a credit on your account or gift card based on the value paid at the time of purchase.

Please note, items purchased on finance cannot be exchanged for a gift card.

 

Hassle free warranty service

If your product develops a fault within the manufacturer warranty period, you need to fill out our request a return form.

If your product develops a fault outside of the manufacturer warranty or PB Tech warranty period, we offer a full repair service and are an authorised repair agent for leading brands such as Samsung, HP, Toshiba, Lenovo and more.

 

Returning a product / making a warranty claim

To return a product to PB Tech, please complete our request a return form.

Or view our returns policy for more information.

Raspberry Pi Official Camera Module 3 Updated Version from Camera Module 2, Build-In 12M Pixel Sony IMX708 Image Sensor Module

AUD $40.88

Date Created: 05:22, 05-12-2024
Product URL: https://www.pbtech.com/product/SEVRBP0396/Raspberry-Pi-Official-Camera-Module-3-Updated-Vers

Features


The Raspberry Pi Camera Module 3 is the latest entry in the mainstream RPi camera line-up, and the successor to the popular Camera Module 2. Built around a 12-megapixel Sony IMX708 image sensor module, Camera Module 3 offers a few key enhancements over its predecessor. Improved low-light sensitivity makes for better photos and output in situations where there's not a lot of light. The module also features powered autofocus making it easier to get a sharp picture output. Finally the Camera Module 3 features High Dynamic Range (HDR) support expanding the range of color and contrast in the output.

 - Back-illuminated, stacked CMOS 12-megapixel Sony IMX708 image sensor
 - High signal-to-noise ratio (SNR)
 - Built-in 2D Dynamic Defect Pixel Correction (DPC)
 - Phase Detection Autofocus (PDAF) for rapid autofocus
 - QBC Re-mosaic function
 - HDR mode (up to 3 megapixel output)
 - CSI-2 serial data output
 - 2-wire serial communication (supports I2C fast mode and fast mode plus)
 - 2-wire serial control of focus mechanism

Not just for stills

Camera Module 3 can record full HD video at 50fps, with higher frame rates available at lower resolutions. Featuring an HDR mode and autofocus, it not only provides great stills quality, but is also a fantastic tool for video recording and streaming. Watch our video filmed entirely on Camera Module 3 to see it in action.

For developers. Learn more about libcamera

Camera Module 3 takes advantage of the Raspberry Pi Open Source Camera System powered by libcamera. This rich set of libraries gives developers precise control over image processing and better access to the internals of Camera Module 3.

For beginners. Learn more about Picamera2

The latest version of Raspberry Pi OS comes pre-installed with a beta of Picamera2, a Python library developed here at Raspberry Pi in Cambridge. For beginners and advanced users alike, Picamera2 is perfect for everything from home projects to machine learning applications.

Documentation. Camera Module 3 documentation

From hardware schematics to software configuration, developers and users can find all the information they need about Camera Module 3 in our extensive and detailed documentation.

Documents:

Raspberry Pi Camera Module 3 product brief
Raspberry Pi Camera Module 3 Standard mechanical drawing
Raspberry Pi Camera Module 3 Wide mechanical drawing

Shot on Camera Module 3

Specifications

Sensor

Back-illuminated, stacked CMOS 12-megapixel Sony IMX708 image sensor

Resolution:

11.9 megapixels

Sensor size:

7.4mm sensor diagonal

Pixel size:

1.4µm x 1.4µm

Horizontal/vertical:

4608 x 2592 pixels

Diagonal field of view:

75 degrees (Camera Module 3, Camera Module 3 NoIR), 120 degrees (Camera Module 3 Wide, Camera Module 3 NoIR Wide)

Common video modes:

1080p50, 720p100, 480p120

Output:

RAW10

IR cut filter:

Integrated in standard variants; not present in NoIR variants

Dimensions:

25 x 24 x 11.5mm (12.4mm height for Wide variants)

Ribbon cable length:

140mm

Cable connector:

15 x 1mm FPC

Includes:

Raspberry Pi Camera Module 3
150mm CSI cable

Cable compatibility:

All models of Raspberry Pi Zero require a Raspberry Pi Zero camera cable to connect to the Raspberry Pi Camera Module; the standard cable supplied with the camera is not compatible with the smaller Raspberry Pi Zero camera connector. Suitable cables are supplied with the Raspberry Pi Zero Case.

Date Created: 05:22, 05-12-2024
Product URL: https://www.pbtech.com/product/SEVRBP0396/Raspberry-Pi-Official-Camera-Module-3-Updated-Vers