Cruxtec ADS01 Clean Range Compressed Air Duster 400ml Spray Can with Nozzle Dust-off Compressed air safely and quickly blow dust, dirt and debris from even the hard to reach places

These are simple products but they're just a waste of $
a few issues with this product:
1. not powerful enough to be effective by far
2. the pressure drops after a few seconds
3. need to let the can warm up before you can use it again
4. the trigger gets stuck "on" - by design?

This is all while using the product correctly, i.e. upright position and no shaking These are simple products but they're just a waste of $
a few issues with this product:
1. not powerful enough to be effective by far
2. the pressure drops after a few seconds
3. need to let the can warm up before you can use it again
4. the trigger gets stuck "on" - by design?

This is all while using the product correctly, i.e. upright position and no shaking

Good reviews maybe haven't used other brands. Air comes out very slowly, not enough to get dust out of a PSU. Ended up throwing out 2 cans. A lot of condensation. Dynamix is amazing but was out of stock for a while. I ended up getting a cordless blower which is better for the environment and my pocket :) Good reviews maybe haven't used other brands. Air comes out very slowly, not enough to get dust out of a PSU. Ended up throwing out 2 cans. A lot of condensation. Dynamix is amazing but was out of stock for a while. I ended up getting a cordless blower which is better for the environment and my pocket :)

Cleans the keyboard etc as it says Cleans the keyboard etc as it says

I have used lots of compressed air in a can as a printer/computer tech over the years. This stuff is the worst, seriously. For me it is completely useless. Liquid comes out if you tilt it slightly, you aren't supposed to shake it but it doesn't work if you don't shake it, pressure is very poor and drops off to even worse after seconds. The latest can locks on when you spray it so you have to manually release it to stop it by pulling the trigger back, that might sound useful but is not good for air in a can. I have used lots of compressed air in a can as a printer/computer tech over the years. This stuff is the worst, seriously. For me it is completely useless. Liquid comes out if you tilt it slightly, you aren't supposed to shake it but it doesn't work if you don't shake it, pressure is very poor and drops off to even worse after seconds. The latest can locks on when you spray it so you have to manually release it to stop it by pulling the trigger back, that might sound useful but is not good for air in a can.

Bought about a week ago. Haven't purchased this in a while but due to lack of options reluctantly bought it again as it's not exactly the greatest. They've managed to get even worse it would seem. When used, canister will only lock into spray mode with the trigger and has to be pulled with quite a bit of force to get it to stop. Great way to get liquid coolant on your computer parts.
Absolute rubbish product Bought about a week ago. Haven't purchased this in a while but due to lack of options reluctantly bought it again as it's not exactly the greatest. They've managed to get even worse it would seem. When used, canister will only lock into spray mode with the trigger and has to be pulled with quite a bit of force to get it to stop. Great way to get liquid coolant on your computer parts.
Absolute rubbish product

This product is genuinely terrible and would not recommend to anyone.

We have been using the Dynamix air dusters (CK-AD400) which used to be $13/can but can't get that product anymore from pbtech so decided to try this product and it is terrible and wouldn't recommend.

This product consistently comes out cold and wet so can't use it (even when completely upright) to dust anything technology related, air pressure is very inconsistent too. This product is genuinely terrible and would not recommend to anyone.

We have been using the Dynamix air dusters (CK-AD400) which used to be $13/can but can't get that product anymore from pbtech so decided to try this product and it is terrible and wouldn't recommend.

This product consistently comes out cold and wet so can't use it (even when completely upright) to dust anything technology related, air pressure is very inconsistent too.

Was looking for chewp but expected it would still do the job, this does not do its job, I could literally blow harder Was looking for chewp but expected it would still do the job, this does not do its job, I could literally blow harder

Sporadic spraying. Compressed air takes a few seconds to fully kick in, after pressing trigger. Sporadic spraying. Compressed air takes a few seconds to fully kick in, after pressing trigger.

The airflow is weak and the trigger gets stuck. The airflow is weak and the trigger gets stuck.

This is not a good product. The trigger gets stuck and the pressure is very poor. It would be more effective to just blow with your mouth.
There is another brand in the blue can which is far better. It might cost twice the price but this cruxtec stuff is just an inferior product.
I think a 1 star review is generous. This is not a good product. The trigger gets stuck and the pressure is very poor. It would be more effective to just blow with your mouth.
There is another brand in the blue can which is far better. It might cost twice the price but this cruxtec stuff is just an inferior product.
I think a 1 star review is generous.

It's pretty pathetic to be honest. This is my second can of it. I thought I had a dodgy can first time. But the second can is the same. The issue is that the first time you squirt it, it generates water, so you have to give a quick squirt to "lower the temperature" of the tube, the condensed air (water) then water shoots out. You can then use it with the second squeeze...without water coming out. But by this time the can has cooled down too much, and the flow rate is pathetically low (one assumes because the nozzle ices over? Or something ices over in the can, trigger or nozzle) Whatever the reason, the flow rate is then too low to be of any...view more It's pretty pathetic to be honest. This is my second can of it. I thought I had a dodgy can first time. But the second can is the same. The issue is that the first time you squirt it, it generates water, so you have to give a quick squirt to "lower the temperature" of the tube, the condensed air (water) then water shoots out. You can then use it with the second squeeze...without water coming out. But by this time the can has cooled down too much, and the flow rate is pathetically low (one assumes because the nozzle ices over? Or something ices over in the can, trigger or nozzle) Whatever the reason, the flow rate is then too low to be of any use. Anyway, it's practically useless. Really disappointed

works like a dream works like a dream