be quiet Shadow Rock 3 CPU Cooler 1x 120mm PWM Fan, 163mm Clearance, Support Intel LGA 1700 / 1200 / 2066 / 1150 / 1151 / 1155 / 2011(-3) Square ILM, AMD Socket: AM5 / AM4

It fit my system really well, love the off centre design which keeps the ram dimms clear even on micro ITX boards. It performs well too but there's noticeable coil whine type noise from the the fins/heat pipes. I've tried different tricks to get rid of it but can't eliminate it entirely. It fit my system really well, love the off centre design which keeps the ram dimms clear even on micro ITX boards. It performs well too but there's noticeable coil whine type noise from the the fins/heat pipes. I've tried different tricks to get rid of it but can't eliminate it entirely.

Despite this cooler being on the cheaper side, I have it cooling a 7800X3D currently.
35 degrees during idle, 50 to 60 degrees while gaming and maxes out at 82 degrees under a full load stress test.
It's also almost completely silent! I maxed out the fan speed and could barely hear it! Despite this cooler being on the cheaper side, I have it cooling a 7800X3D currently.
35 degrees during idle, 50 to 60 degrees while gaming and maxes out at 82 degrees under a full load stress test.
It's also almost completely silent! I maxed out the fan speed and could barely hear it!

Seems like a pretty well constructed fan. Mounting it was slightly fiddlier than other brands I've worked with but it was a good solid fit. Problem was on the case I was builing in I couldn't put the side panel on with this fan installed so take notice of the height and check your case. I generally when available use a fan from Silverstone (Hydrogon) and this be quiet fan was a good 12mm taller.

Comes with a good amount of cooling paste so you'll have surplus. Can be handy in situations like mine where I've had to take it out for re-use later. Also came with a nice ling screwdriver in the packaging to screw the mount on which is a nice tou...view more Seems like a pretty well constructed fan. Mounting it was slightly fiddlier than other brands I've worked with but it was a good solid fit. Problem was on the case I was builing in I couldn't put the side panel on with this fan installed so take notice of the height and check your case. I generally when available use a fan from Silverstone (Hydrogon) and this be quiet fan was a good 12mm taller.

Comes with a good amount of cooling paste so you'll have surplus. Can be handy in situations like mine where I've had to take it out for re-use later. Also came with a nice ling screwdriver in the packaging to screw the mount on which is a nice touch.

I did some testing pushing the i7-12700 hard with Prime95 and the temps stayed nice and stable. The fan I usually use that has 2 x fans was no better on the performance.