Creality FDM 3D Printer Ender-3 V3 KE Build Size 220 x 220 x 240 mm Max 500mm/s (Creality Lab test with Hyper PLA) - Auto Calibration - Support ABS - PLA - PETG - TPU(95A) - ASA

Great little printers that are pretty well print after initial installation, there are a few little tweaks one will need to do to get your printing right. If you think they will keep printing fine forever forget it! So many variables and yes filament brands will print differently, also you will need to change things as you go and every now and again you may find it all goes wrong...if you are someone that can't handle the tinkering aspect then 3d printing won't be for you! With all this said the KE is a great 1st step and will also do some pretty technical prints with a little tuning. Pb tech themselves have stepped up also with parts and...view more Great little printers that are pretty well print after initial installation, there are a few little tweaks one will need to do to get your printing right. If you think they will keep printing fine forever forget it! So many variables and yes filament brands will print differently, also you will need to change things as you go and every now and again you may find it all goes wrong...if you are someone that can't handle the tinkering aspect then 3d printing won't be for you! With all this said the KE is a great 1st step and will also do some pretty technical prints with a little tuning. Pb tech themselves have stepped up also with parts and spares needed so don't be scared get in there and you will love them!

The speed is so fast it's worth the price The speed is so fast it's worth the price

I was considering going down the Bambu route but decided to get something like this. It's very usable out of the box and requires little setup time, the included white filament printed the pre-sliced benchy really nicely. I'm coming from an overly-modded Ender 3 which doesn't print as reliably as this thing, I haven't printed "that much" with this but it's a lot more click-and-go and really fast to iterate on designs at the speed this thing prints at.

I immediately did a few things after printing the test benchy which took me a couple of hours and am happy with the result and imagine I won't be fiddling with anything other than slicer settin...view more I was considering going down the Bambu route but decided to get something like this. It's very usable out of the box and requires little setup time, the included white filament printed the pre-sliced benchy really nicely. I'm coming from an overly-modded Ender 3 which doesn't print as reliably as this thing, I haven't printed "that much" with this but it's a lot more click-and-go and really fast to iterate on designs at the speed this thing prints at.

I immediately did a few things after printing the test benchy which took me a couple of hours and am happy with the result and imagine I won't be fiddling with anything other than slicer settings maybe:
- Rooted & replaced Creality's interface with Mainsail
- Sanded down the spacers so the bed would be "more" level (just over 0.2mm variance at 60C)
- Went straight to OrcaSlicer, default settings were good but will probably tweak these a slight bit

By: Kennel 15/02/24

Verified Owner