Raspberry Pi 4 Model B Official Case Fan & Heatsink for Official Raspberry Pi 4 Case

Fits into the standard case perfectly. Can be configured to turn on when the temperature exceeds as preset threshold. Fits into the standard case perfectly. Can be configured to turn on when the temperature exceeds as preset threshold.

The Raspberry Pi 4b gets hot so I’d say this is essential. I set it to come on at 65 deg and this does the job nicely (worth adding the temp to your Pi OS home page to monitor it). The only issue is that this is the 5v fan so it will stay on whenever the Pi has power to it. There are a few work arounds however Inturn mine of at the mains so it’s not an issue. The Raspberry Pi 4b gets hot so I’d say this is essential. I set it to come on at 65 deg and this does the job nicely (worth adding the temp to your Pi OS home page to monitor it). The only issue is that this is the 5v fan so it will stay on whenever the Pi has power to it. There are a few work arounds however Inturn mine of at the mains so it’s not an issue.

You probably need some sort of temperature regulation, otherwise it gets too hot. This does the job of keeping your little computer cool. You probably need some sort of temperature regulation, otherwise it gets too hot. This does the job of keeping your little computer cool.

this worked a dream and so good . i did not use it for a rasberry pi but it fitted on my lighting controller great this worked a dream and so good . i did not use it for a rasberry pi but it fitted on my lighting controller great

The heatsink is easy to install, the fan clips into the "Official" Pi case perfectly, and it's all good to go. The Pi turns the fan on and off when the temperature is getting high, all straight out of the box. The only downside is the whining noise the fan makes when it's running, but the fan only runs once in a while so it's acceptable. The heatsink is easy to install, the fan clips into the "Official" Pi case perfectly, and it's all good to go. The Pi turns the fan on and off when the temperature is getting high, all straight out of the box. The only downside is the whining noise the fan makes when it's running, but the fan only runs once in a while so it's acceptable.

compact & works well with the temp sensor compact & works well with the temp sensor

This fan is nice and quiet, and the extra pin for automatic control is a nice feature. The fan holes for screwing into aftermarket cases don't necessarily line up with other small form factor fans, making it hard to replace existing fans - but it is manageable This fan is nice and quiet, and the extra pin for automatic control is a nice feature. The fan holes for screwing into aftermarket cases don't necessarily line up with other small form factor fans, making it hard to replace existing fans - but it is manageable

A very nice addition to the Raspberry pi. Decent airflow and not too loud. A very nice addition to the Raspberry pi. Decent airflow and not too loud.

By: MarcelV54 01/02/21

Verified Owner

A very affordable unit. Works well. Will 3D print an adapter for Jetson Nano. A very affordable unit. Works well. Will 3D print an adapter for Jetson Nano.

Good quality heatsinks and fan provides adequate cooling. However, without pwm, the fan is quite loud Good quality heatsinks and fan provides adequate cooling. However, without pwm, the fan is quite loud