DEEPCOOL THP-Z5 Z5 Thermal Paste with 10 percent Silver Oxide Compounds

temp with stock paste on my cheap aftermarket fan was still high (around 80 to 90c).
replaced with this paste, and temps now dropped to around 70c under full load.
bench marking with - "IntelBurn Test".

Super happy with this result.

cpu: i7 4th gen.
fan: DEEPCOOL GAMMAXX 200T CPU Cooler temp with stock paste on my cheap aftermarket fan was still high (around 80 to 90c).
replaced with this paste, and temps now dropped to around 70c under full load.
bench marking with - "IntelBurn Test".

Super happy with this result.

cpu: i7 4th gen.
fan: DEEPCOOL GAMMAXX 200T CPU Cooler

I like to spread my thermal compound, so I was pleased to see an effective plastic spreader included in the package. It's quite thick but easy enough to apply, and a little goes a long way. Like any thermal compound, it seems to get everywhere no matter how careful you are, but easy enough to clean up with a little iso. Thermal performance seems to be on par with similar compounds, a little better than the white silicon goop. Non conductive, which is good in case you over do it. I like to spread my thermal compound, so I was pleased to see an effective plastic spreader included in the package. It's quite thick but easy enough to apply, and a little goes a long way. Like any thermal compound, it seems to get everywhere no matter how careful you are, but easy enough to clean up with a little iso. Thermal performance seems to be on par with similar compounds, a little better than the white silicon goop. Non conductive, which is good in case you over do it.

My RTX's temps went from 86 (thermal throttling) to 70-75 degrees under a max load sustained! I wouldn't bother spending anymore on thermal paste, no need! I haven't put this on my CPU cooler yet though, although after my temps still being very low a couple of months later I would record it! Don't bother splashing for better! My RTX's temps went from 86 (thermal throttling) to 70-75 degrees under a max load sustained! I wouldn't bother spending anymore on thermal paste, no need! I haven't put this on my CPU cooler yet though, although after my temps still being very low a couple of months later I would record it! Don't bother splashing for better!

My favourite part was when it was like "its pastin' time" and pasted all over the place. My favourite part was when it was like "its pastin' time" and pasted all over the place.

By: SharnZ 24/11/24

Verified Owner

Not too bad for the prices. idles 3c higher than my previous thermal paste. A bit on the chalky side so hard to spread. It does come with spreader which is nice Not too bad for the prices. idles 3c higher than my previous thermal paste. A bit on the chalky side so hard to spread. It does come with spreader which is nice

Good consistency, good to apply, cpu temperature meter shows well. Time will tell, but so far, very impressed Good consistency, good to apply, cpu temperature meter shows well. Time will tell, but so far, very impressed

Works awesome can do about 5pc builds before it runs out An comes with a spreed spatula which is awesome an its easy to apply an use Works awesome can do about 5pc builds before it runs out An comes with a spreed spatula which is awesome an its easy to apply an use

Quality thermal paste at a reasonable price. Quality thermal paste at a reasonable price.

I like how easy it was to apply and how it came with a spatula to help with spreading the substance. I like how easy it was to apply and how it came with a spatula to help with spreading the substance.

Used this with included spreader and ryzen 1600 idle temp with stock cooler fan was 20ish degrees Used this with included spreader and ryzen 1600 idle temp with stock cooler fan was 20ish degrees

What you’d expect What you’d expect

Hasn`t let me down EVER ! Best I`ve used so far Hasn`t let me down EVER ! Best I`ve used so far