Brateck LDT11-C024 13''-27'' Aluminum Dual monitor desk mount - Max load: 8kg per arm - Supports VESA 75x75 & 100x100 - Extend, tilt and swivel - Max arm extension - 792mm - Colour: Slate black & metallic grey

Easy to put together, Easy to work

Although one screw for the cable management wont come out :/ Easy to put together, Easy to work

Although one screw for the cable management wont come out :/

Great monitor arms, nice and sturdy. Not too bad to set up, my monitors could be a little bit higher but otherwise good. Great monitor arms, nice and sturdy. Not too bad to set up, my monitors could be a little bit higher but otherwise good.

Bought two of these and am using them with 24" screens - I have found them very solid and easy to install.
They also cater for a variety of installations: clamped on to the edge of your desk, clamped through the cable hole and clamped through a drilled (10mm) hole through the desk. Bought two of these and am using them with 24" screens - I have found them very solid and easy to install.
They also cater for a variety of installations: clamped on to the edge of your desk, clamped through the cable hole and clamped through a drilled (10mm) hole through the desk.

This stand can really hold your monitor up to 27 inches and it is sturdy with elegant look compare to others. This stand can really hold your monitor up to 27 inches and it is sturdy with elegant look compare to others.

Brought two of these, first one went together well and is holding two 24" monitors without issue. Second one has an issue with my 27" monitor, I can not tighten it enough to stop it drooping forward. Noticed that the bracket nut seems to have come out of where it should be, need to dismantle and see if I can fix before potential replacement. But for now they do what they say they do, I just hope I can get this second one working properly. Brought two of these, first one went together well and is holding two 24" monitors without issue. Second one has an issue with my 27" monitor, I can not tighten it enough to stop it drooping forward. Noticed that the bracket nut seems to have come out of where it should be, need to dismantle and see if I can fix before potential replacement. But for now they do what they say they do, I just hope I can get this second one working properly.

Easy to set up. Keeps the home office organised and tidy. Easy to set up. Keeps the home office organised and tidy.

Really neat product...I have two 24" monitors setup at home, and it's very tidy. Really neat product...I have two 24" monitors setup at home, and it's very tidy.

Fixing this item to a home office desk is very easy if the back of the desk is open.
I cut out a section of the skirt screen to use the vice-type attachment.
Otherwise it can be attached by drilling through the desktop.
It is easy to attached the monitor screens and position them as desired, and it is stable and secure.
There is enough arm mobility to move the monitors, but it is easy to set them up so there is also no droop.
So that is why this is the second time that I have purchased this item (first is being used by one of my children working from home) Fixing this item to a home office desk is very easy if the back of the desk is open.
I cut out a section of the skirt screen to use the vice-type attachment.
Otherwise it can be attached by drilling through the desktop.
It is easy to attached the monitor screens and position them as desired, and it is stable and secure.
There is enough arm mobility to move the monitors, but it is easy to set them up so there is also no droop.
So that is why this is the second time that I have purchased this item (first is being used by one of my children working from home)

Pros: Screens are nice & high which works well on my standing desk. Price is awesome.
Cons: The first hinge after the VESA mount is pretty budget steel & the screens sag under the weight. The fix would be to have 4 lock washers to fit on the inside of the hinges. Pros: Screens are nice & high which works well on my standing desk. Price is awesome.
Cons: The first hinge after the VESA mount is pretty budget steel & the screens sag under the weight. The fix would be to have 4 lock washers to fit on the inside of the hinges.

Does everything you need it to do, especially for that amount of money. If you wanted to be really fussy you could say that it could do with more cable management, but I think it's actually unfair to even suggest it's got any downsides for the money being asked. Does everything you need it to do, especially for that amount of money. If you wanted to be really fussy you could say that it could do with more cable management, but I think it's actually unfair to even suggest it's got any downsides for the money being asked.

Just set it up and it is holding 2 24inch screens that are 4kg each. others we have tried failed this setup test. so far so good. Looks like it is going to do the job quite satisfactorily. Just set it up and it is holding 2 24inch screens that are 4kg each. others we have tried failed this setup test. so far so good. Looks like it is going to do the job quite satisfactorily.

This is an easily to use dual arm, for the price it's amazing. This is an easily to use dual arm, for the price it's amazing.