Netsys NV-202 VDSL2 Bridge
DIP Switch for CPE/CO Modes
Netsys NV-202 VDSL2 Bridge
DIP Switch for CPE/CO Modes
- Brand: Netsys
- MPN: NV-202
- Part #: NETNTS2020
- UPC:
What PB Tech customers are saying about this product...
See More Reviews"Does exactly what it says. Handy for using existing phone wiring. Also works on active analogue phone line (still requires filter for this use). Just plug and play and away you go."
"Very satisfied with the quality of this product. Running 100Mbit/s through two wires of shared Cat 5e cable, which also handles a three wire serial bus for a solar setup with no is ...view more"
Features
Specifications
Reviews
Delivery & Pick-up
Returns & Warranty
Popular Wired Routers





Netsys NV-202 VDSL2 Bridge DIP Switch for CPE/CO Modes
- Brand: Netsys
- MPN: NV-202
- Part #: NETNTS2020

Product URL: https://www.pbtech.com/pacific/product/NETNTS2020/Netsys-NV-202-VDSL2-Bridge-DIP-Switch-for-CPECO-Mo?qr=similar-no-stock
Features
Since VDSL2 has the characteristic of higher bandwidth over shorter distances, the ideal architecture for Telcoms is to use fiber optic lines as the backbone and a VDSL2 line as the last mile into the home or office. With outstanding throughput, the NV-202 can complement a fiber network to offer the best solution for delivering Triple play(Video/Voice/Data) or home entertainment services.
Key Features & Benefits
- Supports RJ-11/Terminal Block combo for Line port.
- Supports high bandwidth up to 100Mbps symmetric over Line ports
- Support long reach mode up to 3 km with 24 gauge phone wire
- Support auto speed for Line port and Interleave mode selectable through CO side DIP switch
- DIP switch with CO and CPE mode selectable
- Supports interleave / INP & noise margin config by DIP Switch
- Supports Surge protection
- Supports wall mounting
- Supports DIN-Rail mount installation (Optional)
- Compact size and metal case design
- Supports point-to-point applications
Specifications
Standard:
IEEE802.3 standard
IEEE802.3u standard
G993.2 VDSL2 standard
Physical Interface:
2 x RJ-45 10/100Mbps auto-negotiation Ethernet port
1 x RJ-11/Terminal Block connector for VDSL2 line port
1 x DIP Switch
1 x Power Jack
LED indication:
1 x Power LED
2 x Link/Active Status for Ethernet port
1 x Link LED for VDSL2 port
1 x CO Mode indicator LED
1 x CPE Mode indicator LED
Power Requirement:
Input Voltage: 12VDC / 1A
VDSL2 Line Code:
Discrete multitone (DMT) modulation
VDSL2 Transmission Mode:
Packet Transfer Mode (PTM)
Operating Temperature:
0°C~ 50°C (32°F ~ 122°F)
Storage Temperature:
-20°C ~ 70°C (-4°F ~ 158°F)
Humidity:
10 to 90% (non-condensing)
EMC: EMI Compliant:
FCC Class B
EMS Compliant:
CE mark
Dimensions:
95 x 110 x 27 mm (3.74" x 4.33" x 1.06")