Teltonika RUT360 Industrial Cellular Router with WiFi

Product Code

RUT360

Mobile module

4G (LTE) - Cat 6 up to 300 Mbps, 3G - Up to 42 Mbps

Status

Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCID

SMS

SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto reply

USSD

Supports sending and reading Unstructured Supplementary Service Data messages

Multiple PDN

Possibility to use different PDNs for multiple network access and services

Bridge mode

Direct connection (bridge) between mobile ISP and device on LAN

Wireless mode

802.11 b/g/n, 2x2 MIMO, Access Point (AP), Station (STA)

WiFi security

WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation

ESSID

ESSID stealth mode

Wireless Hotspot

Captive portal (Hotspot), internal/external Radius server, SMS OTP, MAC auth, built in customizable landing page, walled garden

WAN

1 x WAN port (can be configured as LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover

LAN

1 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover

Routing

Static routes, Dynamic routes (planned)

Network protocols

TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP (planned), SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client

Connection monitoring

Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection

Firewall

Port forwards, traffic rules, NAT rules, custom rules

DDNS (planned)

Supported >25 service providers, others can be configured manually

Network backup

Mobile, Wired and WiFi WAN options, each of which can be used as an automatic Failover

Load balancing

Balance Internet traffic over multiple WAN connections

SSHFS (optional)

Possibility to mount remote file system via SSH protocol (not available in standard FW)

Authetication

Pre-shared key, digital certificates, X.509 certificates

Firewall

Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

VLAN

Tag based VLAN separation

Protocols

HTTP(S), MQTT, Azure MQTT, Kinesis

FOTA

Firmware update from server, automatic notification

SSH

SSH (v1, v2)

SMS

SMS status, SMS configuration, send/read SMS via HTTP POST/GET

Call

Reboot, Status, Mobile data on/off, Output on/off

MQTT (planned)

MQTT Broker, MQTT publisher

SNMP (planned)

SNMP (v1, v2, v3), SNMP trap

JSON-RPC

Management API over HTTP/HTTPS

Modbus (planned)

Modbus TCP status/control

CPU

QCA9531, MIPS 24kc, 650 MHz

RAM

128 MB, DDR2

FLASH storage

16 MB, SPI Flash (optional up to 256 MB)

Configurable I/O

2 x Configurable digital Inputs/Outputs. Digital input 0 - 6 V detected as logic low, 8 - 30 V detected as logic high. Open collector output, max output 30 V, 300 mA

Input voltage range

9 - 30 VDC, reverse polarity protection, voltage surge/transient protection

Power consumption

10.5 W max

Ethernet

2 x RJ45 ports, 10/100 Mbps

I/Os

2 x Configurable digital Inputs/Outputs on 4 pin power connector

Status LEDs

2 x Mobile connection type, 3 x Mobile connection strength, 2 x Eth status, 1 x Power

SIM

1 x SIM slots (Mini SIM - 2FF), 1.8 V/3 V, external SIM holders

Antenna

2 x SMA for LTE, 2 x RP-SMA for WiFi

Casing material

Aluminium housing with DIN rail mounting option

Dimensions

100 x 30 x 85 mm

Weight

247 g

Mounting options

DIN rail, flat surface placement

Operating temperature

-40 C to 75 C

Operating humidity

10 % to 90 % non-condensing