Creality Ender-3 V3 KE FDM 3D Printer

Great little printers that are pretty well print after initial installation, there are a few little tweaks one will need to do to get your printing right. If you think they will keep printing fine forever forget it! So many variables and yes filament brands will print differently, also you will need to change things as you go and every now and again you may find it all goes wrong...if you are someone that can't handle the tinkering aspect then 3d printing won't be for you! With all this said the KE is a great 1st step and will also do some pretty technical prints with a little tuning. Pb tech themselves have stepped up also with parts and...view more Great little printers that are pretty well print after initial installation, there are a few little tweaks one will need to do to get your printing right. If you think they will keep printing fine forever forget it! So many variables and yes filament brands will print differently, also you will need to change things as you go and every now and again you may find it all goes wrong...if you are someone that can't handle the tinkering aspect then 3d printing won't be for you! With all this said the KE is a great 1st step and will also do some pretty technical prints with a little tuning. Pb tech themselves have stepped up also with parts and spares needed so don't be scared get in there and you will love them!

I was considering going down the Bambu route but decided to get something like this. It's very usable out of the box and requires little setup time, the included white filament printed the pre-sliced benchy really nicely. I'm coming from an overly-modded Ender 3 which doesn't print as reliably as this thing, I haven't printed "that much" with this but it's a lot more click-and-go and really fast to iterate on designs at the speed this thing prints at.

I immediately did a few things after printing the test benchy which took me a couple of hours and am happy with the result and imagine I won't be fiddling with anything other than slicer settin...view more I was considering going down the Bambu route but decided to get something like this. It's very usable out of the box and requires little setup time, the included white filament printed the pre-sliced benchy really nicely. I'm coming from an overly-modded Ender 3 which doesn't print as reliably as this thing, I haven't printed "that much" with this but it's a lot more click-and-go and really fast to iterate on designs at the speed this thing prints at.

I immediately did a few things after printing the test benchy which took me a couple of hours and am happy with the result and imagine I won't be fiddling with anything other than slicer settings maybe:
- Rooted & replaced Creality's interface with Mainsail
- Sanded down the spacers so the bed would be "more" level (just over 0.2mm variance at 60C)
- Went straight to OrcaSlicer, default settings were good but will probably tweak these a slight bit

By: Kennel 15/02/24

Verified Owner

Auto bed levelling and super fast speeds are much desired upgrades over my original Ender 3 Pro.
I had issues with surface quality of my parts, but have resolved this after purchasing the vibration compensation sensor separately.
The frame isn't as sturdy as older models, installing a gantry support should resolve this (https://www.thingiverse.com/thing:6516352).

Aside from some initial issues, I am very happy with this printer, it should last many years and be a great workhorse. Auto bed levelling and super fast speeds are much desired upgrades over my original Ender 3 Pro.
I had issues with surface quality of my parts, but have resolved this after purchasing the vibration compensation sensor separately.
The frame isn't as sturdy as older models, installing a gantry support should resolve this (https://www.thingiverse.com/thing:6516352).

Aside from some initial issues, I am very happy with this printer, it should last many years and be a great workhorse.

The speed is so fast it's worth the price The speed is so fast it's worth the price

The Creality Ender-3 V3 KE is a great entry-level FDM 3D printer, especially well-suited for beginners.
It has a user-friendly Creality print slicer and features convenient auto bed leveling.
Overall, it's reliable and easy to use right out of the box. The Creality Ender-3 V3 KE is a great entry-level FDM 3D printer, especially well-suited for beginners.
It has a user-friendly Creality print slicer and features convenient auto bed leveling.
Overall, it's reliable and easy to use right out of the box.

Ive had 2 of these printers running almost non stop for three weeks and in thst time ive had one failed print, and it was definitely my fault. This printer takes all the difficulty out of 3d printing. Ive had 2 of these printers running almost non stop for three weeks and in thst time ive had one failed print, and it was definitely my fault. This printer takes all the difficulty out of 3d printing.

I started off as a complete noob, had literally never seen a 3D printer in person (other than at the shop) before getting my hands on this. It was easy to setup and get going and more than adequate for anyone wanting to see if this whole "3D printing thing" is for them.

Be warned though *** irrespective of what 3D printer you buy ***, it's a big deep rabbit hole that will consume many many hours of your time but at the same time, it's an awesome and fun hobby to get into. Be prepared to have to learn about 3D filament types (and differences between suppliers) + all the different slicers and modelling tools out there.

This printer is very ...view more I started off as a complete noob, had literally never seen a 3D printer in person (other than at the shop) before getting my hands on this. It was easy to setup and get going and more than adequate for anyone wanting to see if this whole "3D printing thing" is for them.

Be warned though *** irrespective of what 3D printer you buy ***, it's a big deep rabbit hole that will consume many many hours of your time but at the same time, it's an awesome and fun hobby to get into. Be prepared to have to learn about 3D filament types (and differences between suppliers) + all the different slicers and modelling tools out there.

This printer is very capable straight out of the box & if you're prepared to invest the time into it, can get really exceptional results over and above what might reasonably be expected at this price point. If you're looking at all the reviews and agonising over "getting the best printer to start with", just get this, you'll be fine, truth is all the all the printers are good now, you just need to commit !

I'm 100% satisfied and happy with my purchase & would recommend to anyone 3D printing curious,

This was Hubby's birthday present, and I'm so glad this is what I bought. It has been non stop working since he got it 3 weeks ago and hasn't missed a beat yet. Has made several different items from containers to figurines and anything in between. Easy to set up, easy to use, just need to find the right pc software for you. And the bonus is there are so many patterns out there already most of the time you don't need to design yourself This was Hubby's birthday present, and I'm so glad this is what I bought. It has been non stop working since he got it 3 weeks ago and hasn't missed a beat yet. Has made several different items from containers to figurines and anything in between. Easy to set up, easy to use, just need to find the right pc software for you. And the bonus is there are so many patterns out there already most of the time you don't need to design yourself

By: BekahD1 10/03/25

Verified Owner

I got this as a birthday present, was fantastic and was printing heaps then after a bout 5 days ish it started rubbing on the print and didn't sound good, then fixed it but no it has terrible print quality and and on some prints it still hits the print (nozzle hitting the print) i have tried every thing and read everything but still no fix I got this as a birthday present, was fantastic and was printing heaps then after a bout 5 days ish it started rubbing on the print and didn't sound good, then fixed it but no it has terrible print quality and and on some prints it still hits the print (nozzle hitting the print) i have tried every thing and read everything but still no fix

Super easy to setup and start printing. Very happy with my first 3d printer purchase. Pb staff very helpful too. Cheers Super easy to setup and start printing. Very happy with my first 3d printer purchase. Pb staff very helpful too. Cheers

I got this printer as a gift about a year ago and it has been great but recently it has had a few minor problems (nothing stopping printing) its just been a bit louder recently but other than that it's great the app works well, the app library is OK and I can remotely start prints over wifi all through the app .would recommend this to a beginer but I do want to try the bambu labs a1 mini I got this printer as a gift about a year ago and it has been great but recently it has had a few minor problems (nothing stopping printing) its just been a bit louder recently but other than that it's great the app works well, the app library is OK and I can remotely start prints over wifi all through the app .would recommend this to a beginer but I do want to try the bambu labs a1 mini

I got this as an upgrade to my already DIY/upgraded Ender 3. Huge difference. Wish I'd gone for this instead of trying to modify an original Ender 3. I got this as an upgrade to my already DIY/upgraded Ender 3. Huge difference. Wish I'd gone for this instead of trying to modify an original Ender 3.

By: ssamjh 29/05/25

Verified Owner