Bambu Lab ABS Filament Refill Pack - Black

Bambu ABS Refill Pack (Go to the bottom of the page to find how to swap new filament with Bambu Lab Reusable spool)

Downloads: Filaments TDS

Product Features:

 - Tough and Durable
 - Good Heat & Freezing Resistance
 - Comes with High Temperature Reusable Spool
 - Diameter: 1.75mm +/- 0.03mm

Cautions for Use:

 - AMS Compatible
 - AMS lite NOT Compatible
 - Enclosure Printers Required

Bambu ABS is a dependable 3D printing material renowned for its exceptional stability, durability, and high impact resistance. Additionally, this filament also boasts excellent heat resistance, making it ideal for projects involving moderate temperatures. With its versatile properties, Bambu ABS filament stands as an excellent choice for a wide range of 3D printing applications.

Strong & Durable

As one of the most widely used filaments, Bambu ABS comes with excellent mechanical properties that make it stronger than normal PLA and PETG. It is ideal for creating functional parts, prototypes, and standard engineering components, ensuring long life and reliability.

Impressive Heat Resistance

Bambu ABS filament offers exceptional heat resistance (Heat Deflection Temperature: 87 °C) coupled with commendable mechanical properties. This makes it an outstanding choice for everyday functional parts that require high-temperature resistance.

Water-Resistant

Boasting excellent water-resistant performance, Bambu ABS ensures relatively long-lasting durability when used in a wet environment.

Tough with High Impact Resistance

Bambu ABS is exceptionally robust, and its prints can withstand multiple impacts, collisions, and falls. It exhibits good impact resistance even at low temperatures.

Accessory Compatibility

ABS Hex Code Table

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

Printing Tips:

 - Pungent and unpleasant odors may be released during printing. Make sure your printer is placed in a well-ventilated area.

 - Drying conditions: 80? for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.

 - ABS is prone to warping when printing large size and/or high infill density model. To avoid warping: 1) Not recommemded to print too large size and/or high infill density model. 2) Use enclosure printers and ensure the build plate is properly glued before printing. 3) Set lower printing speed and higher heatbed temperature. For more details please refer to: Common print quality problems and solutions on WIKI.

Print Your Own Spool Now

Bambu Lab 3D printer comes with a spool model. Print Spool Part 1&2 from the build-in files!

2.If you don't have the spool model in your printer, please click here to download.

Instructions for Printed Spool

When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).

Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.

Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.

Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.

Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).

Step 2. Tear apart and pull out the plastic strips.

Learn more about swapping the new filament with Bambu Reusable Spool on Wiki, Click Here.