Ubiquiti UISP WAVE-LR 60GHz 2Gbps PtMP Wave Client Station with 5Ghz Backup
Ubiquiti UISP WAVE-LR 60GHz 2Gbps PtMP Wave Client Station with 5Ghz Backup
- Brand: Ubiquiti
- MPN: WAVE-LR
- Part #: NAPUBI6037
- UPC: 810010078957
- Brand: Ubiquiti
- MPN: WAVE-LR
- Part #: NAPUBI6037
- UPC: 810010078957
Features
Specifications
Reviews
Delivery & Pick-up
Returns & Warranty
Popular CPE





Ubiquiti UISP WAVE-LR 60GHz 2Gbps PtMP Wave Client Station with 5Ghz Backup
- Brand: Ubiquiti
- MPN: WAVE-LR
- Part #: NAPUBI6037
- UPC:810010078957

Product URL: https://www.pbtech.com/pacific/product/NAPUBI6037/Ubiquiti-UISP-WAVE-LR-60GHz-2Gbps-PtMP-Wave-Client
Features
60 GHz PtMP station powered by Wave Technology.
- Max. link range:
- Wave AP: 8 km
- Wave AP Micro: 6 km
- Max. total throughput: 2 Gbps (1.5 Gbps duplex)
- 5 GHz weatherproof backup radio (Max. throughput: 800 Mbps)
- (1) GbE RJ45 port
- Precision alignment mount
- Integrated GPS & Bluetooth
Specifications
Mechanical
Dimensions
Ø424.4 x 166.2 mm (Ø16.7 x 6.5")
Weight
Without mount: 2.6 kg (5.7 lb)
With mount: 3.8 kg (8.4 lb)
Enclosure material
UV stabilized plastic
Mount material
Stainless steel
Pole mount diameter
25 to 76.2 mm (1 to 3") on pipe outer diameter
Wind loading
286 N at 200 km/h (64.3 lbf at 125 mph)
Weatherproofing
IPX6
Hardware
Processor
Dual-core ARM® Cortex®-A53 at 1 GHz
Memory
DDR3L 512 MB
Networking interface
(1) GbE RJ45 port
Max. power consumption
20W
Power method
Passive PoE 4-pairs (1, 2+; 3, 6-) (4, 5+; 7, 8-)
Passive PoE 2-pairs (4, 5+; 7, 8-), for 44-54V DC only
Power supply
48V DC, 0.65A gigabit PoE adapter (Included)
Can be powered by a UISP Router or UISP Switch
Supported voltage range
44-54V DC
22-27V DC
GPS
Yes
Button
Factory reset
LEDs
Power, Ethernet, GPS, link
Ambient operating temperature
-40 to 60° C (-40 to 140° F)
Ambient operating humidity
5 to 95% noncondensing
Certifications
FCC, IC, CE
Software
Operating mode
PtMP station, PtP*
*FW version 3.2.0 and later.
Ubiquiti specific features
Wave AI, discovery protocol
Services
UISP, ping watchdog, NTP client, SNMP
Tools
Antenna alignment, discovery utility, ping, trace route, speed test, cable test*, site survey*, traffic shaping**
*FW version 3.3.0 and later.
**FW version 3.4.0 and later.
Network
Bridge/Router* mode
*Router is available in PtMP station mode only.
Application requirements
UISP: Version 1.4.5 and later
System
Total throughput
2 Gbps (1.5 Gbps duplex)
Max. range
8+ km
Encryption
WPA2-PSK (AES)
RF
Operating frequency*
57-71 GHz
*Depends on regulatory region.
Channel bandwidth
2160, 1080, 540* MHz
*FW version 3.3.0 and later.
Operating channels*
58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120, 70200 MHz
*Depends on regulatory region.
Modulation
16QAM, QPSK
Antenna gain
46 dBi
Polarization
Vertically linear
Beamwidth
Azimuth: 3 dB 1°
Elevation: 3 dB 1°
Back-Up RF
WiFi standard
802.11ax (WiFi 6)
Operating frequency*
US/CA
Worldwide
U-NII-1 5150 - 5250 MHz
U-NII-2A 5250 - 5350 MHz
U-NII-2C 5470 - 5725 MHz
U-NII-3 5725 - 5850 MHz
5150 - 5875 MHz
*Depends on regulatory region.
Channel bandwidth
20, 40, 80 MHz
Modulation
BPSK (1/2), QPSK (1/2), QPSK (3/4), 16QAM (1/2), 16QAM (3/4), 64QAM (2/3), 64QAM (3/4), 64QAM (5/6), 256QAM (3/4), 256QAM (5/6), 1024QAM (3/4), 1024QAM (5/6)
Antenna gain
22 dBi
Polarization
Dual-linear
Beamwidth
Azimuth: 3 dB 8°
Elevation: 3 dB 8°
Cross-pol isolation
20 dB
LEDs
Power
Flashing white: bootup in progress
White: not connected to UISP application
Blue: connected to UISP application
Flashing blue: locate in progress
Blue/white: firmware upgrade in progress
Ethernet
Flashing blue: Ethernet traffic detected
GPS
Blue: receiving at least (4) GPS satellite signal
Links
White: 5GHz link
Blue: 60GHz link