Raspberry Pi Build HAT for Raspberry PI 4 / 5 / Zero Supports LEGO Robotics SPIKE, MINDSTORMS, and LEGO Device Use LPF2 Connector

WARNINGS:

 - This product shall only be connected to a Raspberry Pi via the GPIO header.
 - Any external power supply used with the Raspberry Pi Build HAT shall comply with relevant regulations and standards applicable in the country of intended use.
 - This product should be operated in a well-ventilated environment, and if used inside a case, the case should not be covered.
 - Whilst in use, this product should be placed on a stable, flat, non-conductive surface, and should not be contacted by conductive items.
 - The connection of incompatible devices to the Raspberry Pi Build HAT may affect compliance, result in damage to the unit, and invalidate the warranty.
 - The connection of incompatible devices to the GPIO connection of a Raspberry Pi computer may affect compliance and result in damage to the unit and invalidate the warranty.
 - All peripherals used with this product should comply with relevant standards for the country of use and be marked accordingly to ensure that safety and performance requirements are met.
 - The cables and connectors of all peripherals used with this product must have adequate insulation so that relevant safety requirements are met.
 - Operation of this device requires adult supervision.

The Raspberry Pi Build HAT is an add-on board designed in collaboration with LEGO Education to make it easy to control LEGO Technic motors and sensors with Raspberry Pi computers.

It provides four connectors for LEGO Technic motors and sensors from the LEGO Education SPIKE Portfolio. The available sensors include a distance sensor, a colour sensor, and a force sensor. The angular motors come in a range of sizes and include integrated encoders that can be queried to find their position.

The Build HAT fits all Raspberry Pi computers with a 40-pin GPIO header, including?-?with the addition of a ribbon cable or other extension device?-?Raspberry Pi 400. Connected LEGO Technic devices can easily be controlled in Python, alongside standard
Raspberry Pi accessories such as a camera module.

The Raspberry Pi Build HAT power supply, available separately, is designed to power both the Build HAT and Raspberry Pi computer along with all connected LEGO Technic devices.

The LEGO Education SPIKE Prime set 45678 and SPIKE Prime Expansion set 45681, available separately from LEGO Education resellers, include a collection of useful elements supported by the Build HAT.

Features:

 - Controls up to 4 motors and sensors.
 - Powers the Raspberry Pi (when used with a suitable external PSU).
 - Easy to use from Python on the Raspberry Pi.

Documents:

 - Getting started guide

 - Product brief

Explore the Build HAT Python library

View Build HAT Power Supply

View Build HAT projects