Creality Accessories Space Pi Filament Dryer Plus for FDM 3D Printers

Easy to use and works well to dry filament. However, it has a design flaw where if you are using it in a cold room (for example garage) it times out if it doesn't heat up fast enough after 10-12 minutes.
The fan will keep going but it stops heating and flashes E4. You can get around it by switching it off then on again as eventually it warms up but it is annoying as you have to keep checking it.
Probably won't be a problem outside of winter.

Seems to be common fault:

https://forum.creality.com/t/creality-space-pi-plus-error-e4/33519
https://www.reddit.com/r/Creality/comments/1hw027w/e4_error_code_on_space_pi_dryer/ Easy to use and works well to dry filament. However, it has a design flaw where if you are using it in a cold room (for example garage) it times out if it doesn't heat up fast enough after 10-12 minutes.
The fan will keep going but it stops heating and flashes E4. You can get around it by switching it off then on again as eventually it warms up but it is annoying as you have to keep checking it.
Probably won't be a problem outside of winter.

Seems to be common fault:

https://forum.creality.com/t/creality-space-pi-plus-error-e4/33519
https://www.reddit.com/r/Creality/comments/1hw027w/e4_error_code_on_space_pi_dryer/

The dryer works well, but the door design is really annoying, and opening at the back means I can't store it on a shelf like I do with my Sovol printer, as you need access to the back and/or top in order to use. Not a problem if you have it on a desk, but a bit of a silly unnecessary design feature. Otherwise great The dryer works well, but the door design is really annoying, and opening at the back means I can't store it on a shelf like I do with my Sovol printer, as you need access to the back and/or top in order to use. Not a problem if you have it on a desk, but a bit of a silly unnecessary design feature. Otherwise great

The Creality Space Pi Filament Dryer Plus is a game-changer! If you’re using FDM 3D printers, this dryer is a must-have to ensure your filament stays in perfect condition. It’s incredibly easy to use—simply load the filament and let it work its magic. The temperature control is spot on, and it keeps filaments dry, which has improved the print quality significantly, reducing issues like stringing or failed prints.

It’s compatible with a wide range of filaments, including PLA, ABS, and PETG, making it super versatile. The compact design fits nicely on my workspace without taking up too much room. Plus, the drying process is quiet and efficient...view more The Creality Space Pi Filament Dryer Plus is a game-changer! If you’re using FDM 3D printers, this dryer is a must-have to ensure your filament stays in perfect condition. It’s incredibly easy to use—simply load the filament and let it work its magic. The temperature control is spot on, and it keeps filaments dry, which has improved the print quality significantly, reducing issues like stringing or failed prints.

It’s compatible with a wide range of filaments, including PLA, ABS, and PETG, making it super versatile. The compact design fits nicely on my workspace without taking up too much room. Plus, the drying process is quiet and efficient.

Highly recommend the Space Pi Filament Dryer Plus for anyone who wants to extend filament lifespan and improve print results!

Honestly if your on the hunt for a filament dryer this is it. For the price and how much it improves the quality of your prints 100% recommend. I found dryer the spools for abit longer then recommended ( nz weather very humid ). They say the fans noisey. But i found its the way you load the spools. Touch screen is cheap but if you press and hold gently its fine. Worth it considering your prints will look and feel WAY cleaner Honestly if your on the hunt for a filament dryer this is it. For the price and how much it improves the quality of your prints 100% recommend. I found dryer the spools for abit longer then recommended ( nz weather very humid ). They say the fans noisey. But i found its the way you load the spools. Touch screen is cheap but if you press and hold gently its fine. Worth it considering your prints will look and feel WAY cleaner

You can print from the unit as it drys You can print from the unit as it drys

You just can't leave filament out to soak up the moisture in this humidity. This has solved my problem. You just can't leave filament out to soak up the moisture in this humidity. This has solved my problem.

was having problems with some filament and decided to try this dual roll dryer, this has fixed the issues i was having with wet rolls of filament. recomend if you are having problems with wet filament.. was having problems with some filament and decided to try this dual roll dryer, this has fixed the issues i was having with wet rolls of filament. recomend if you are having problems with wet filament..

I've been using it for a couple of weeks now. Great for PLA filaments and the preprogrammed settings really help. Wouldn't recommend it for the more "sensitive" filaments like translucent or glow in the dark. Seems to make them a little brittle. I've been using it for a couple of weeks now. Great for PLA filaments and the preprogrammed settings really help. Wouldn't recommend it for the more "sensitive" filaments like translucent or glow in the dark. Seems to make them a little brittle.

The product works very well. Particularly for filaments like PETG that print poorly if not dried first. A high percentage of print quantity issues like stringing, blobbing etc relate to poorly dried filament.

The first unit I bought was faulty. PB Tech were excellent dealing with the issue. The replacement has worked without missing a beat.

The design and door opening are perfectly fine. You need good clearance for 1kg spools.

There are tubes so you can print directly from the filament dryer. This ensures moisture is kept to a minimum.

This also has relatively quiet operation. You can hardly hear it run unless you are particul...view more The product works very well. Particularly for filaments like PETG that print poorly if not dried first. A high percentage of print quantity issues like stringing, blobbing etc relate to poorly dried filament.

The first unit I bought was faulty. PB Tech were excellent dealing with the issue. The replacement has worked without missing a beat.

The design and door opening are perfectly fine. You need good clearance for 1kg spools.

There are tubes so you can print directly from the filament dryer. This ensures moisture is kept to a minimum.

This also has relatively quiet operation. You can hardly hear it run unless you are particularly sensitive to any kind of sound.

By: KiwiCloudNinja 10/10/25

Verified Owner

This is a great option for drying and storing filament , my workshop gets a bit damp and the drying is very helpful This is a great option for drying and storing filament , my workshop gets a bit damp and the drying is very helpful

THe product does a good job of Drying the filament THe product does a good job of Drying the filament