Insta360 X5 Utility Frame

- Full-metal frame provides all-round protection.
- 22% lighter than the X4 Utility Frame without compromising on durability.
- Features a quick release mounting point, two cold shoe mounts and two 1/4" mounting points.
- Premium quality Mic Windshields ensure clear audio capture in windy conditions or during high-speed activities.

Utility Frame

Full-metal protection without compromising on compatibility.

360° security for a 360° camera

Dependable screw-locking mechanism and included lens cap keep your camera safe.

Lightweight form factor, heavyweight strength

Aluminium alloy construction allows for a 22% weight reduction without lowering durability.

Double the cold shoe mounts, double the setups.

Connect accessories to both sides of your X5.

Lock in for portrait or landscape mode

Get precision portrait and landscape framing with a quick release point and 1/4" mounting point on the bottom, and a 1/4" mounting point on both sides.

Get pro-level audio in all conditions

Constructed from high-quality acoustic foam, the Mic Windshields ensure clear audio in the windiest conditions.

How to Use

1. Turn the screw counterclockwise to unlock the Utility Frame. Pull upwards on the top to open and insert the camera, ensuring that the 1/4" mounting point on the bottom aligns with that of the Utility Frame. Then, close the Utility Frame and turn the screw clockwise to lock securely.
2. Use the Lens Cap to protect the lenses when the camera is not in use.
3. You can attach the Utility Frame to accessories by using the quick release mounting point or 1/4" mounting point at the bottom.
4. There are cold shoe mounting points on either side of the Utility Frame to attach external microphones and other accessories. You can also attach accessories to the 1/4" mounting points on the side to use the camera horizontally.
5. Install the included Mic Windshields onto the X5 Utility Frame to reduce wind noise while shooting.

Notes

1. Only insert the camera into the Utility Frame in the method shown on this store page. When done correctly, the camera's battery and USB covers can be opened without removing the Utility Frame.
2. Ensure the 1/4" mounting point at the bottom of the camera is correctly aligned with the mounting point of the Utility Frame. It should not be at an angle.
3. After installation, ensure the screw at the top of the Utility Frame is securely locked.
4. When there is no need for noise reduction, remove the Mic Windshields from the Utility Frame to prevent damage or loss.
5. Do not use the Mic Windshields in wet conditions as dampness may affect wind noise reduction.
6. Store the Mic Windshields in a dry environment to avoid dampness and moisture damage.