Kingston Fury 16GB DDR4 Desktop RAM - Black
1x 16GB - 2400MHz - SDRAM - PC4-19200 - 1.20V - Non-ECC - Unbuffered - 288-pin - DIMM
Out of stock
Kingston Fury 16GB DDR4 Desktop RAM - Black
1x 16GB - 2400MHz - SDRAM - PC4-19200 - 1.20V - Non-ECC - Unbuffered - 288-pin - DIMM
- Brand: Kingston
- MPN: HX426C16FB/16
- Part #: MEMKHX3603950
- UPC: 740617257052
What PB Tech customers are saying about this product...
See More Reviews"Cheap and effective, very easy to install and setup. There are more powerful and efficient options out there but if you don't need the flashiest/gruntiest PC this will absolutely d ...view more"
"Nothing to complain about. Great stuff! Would definitely shop again from PB, highly recommended"
"Not the fastest speed by 2021 standards, but I've got 32GB of this stuff and my computer is a rocket. More than does the job if you want something cheaper."
Features
Specifications
Reviews
Delivery & Pick-up
Returns & Warranty
Popular Desktop RAM
Kingston Fury 16GB DDR4 Desktop RAM - Black 1x 16GB - 2400MHz - SDRAM - PC4-19200 - 1.20V - Non-ECC - Unbuffered - 288-pin - DIMM
- Brand: Kingston
- MPN: HX426C16FB/16
- Part #: MEMKHX3603950
- UPC:740617257052
Product URL: https://www.pbtech.com/product/MEMKHX3603950/testimonials?testID=2211
Features
HyperX HX426C16FB/16 is a 2G x 64-bit (16GB) DDR4-2666 CL16 SDRAM (Synchronous DRAM) 2Rx8, memory module, based on
sixteen 1G x 8-bit FBGA components per module. Each module supports Intel® Extreme Memory Profiles (Intel® XMP) 2.0.
Each module has been tested to run at DDR4-2666 at a low latency timing of 16-18-18 at 1.2V. Additional timing parameters are
shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical
specifications are as follows:
- JEDEC/PnP: DDR4-2666 CL16-18-18 @1.2V
- XMP Profile #1: DDR4-2666 CL16-18-18 @1.2V
- Power Supply: VDD = 1.2V Typical
- VDDQ = 1.2V Typical
- VPP = 2.5V Typical
- VDDSPD = 2.2V to 3.6V
- Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
- Low-power auto self refresh (LPASR)
- Data bus inversion (DBI) for data bus
- On-die VREFDQ generation and calibration
- Dual-rank
- On-board I2 serial presence-detect (SPD) EEPROM
- 16 internal banks; 4 groups of 4 banks each
- Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
- Selectable BC4 or BL8 on-the-fly (OTF)
- Fly-by topology
- Terminated control command and address bus
- Height 1.340" (34.04mm), w/heatsink
Specifications
CL(IDD)
16 cycles
Row Cycle Time (tRCmin)
45.75ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin)
350ns(min.)
Row Active Time (tRASmin)
29.25ns(min.)
Maximum Operating Power
TBD W*
UL Rating
94 V - 0
Operating Temperature
0degC to +85degC
Storage Temperature
-55degC to +100degC