Kingston 8GB DDR3 Desktop RAM
DDR3-1333 - DIMM - Non-ECC - CL9
Out of stock
Features
Specifications
Reviews
Delivery & Pick-up
Returns & Warranty
Popular Desktop RAM
Kingston 8GB DDR3 Desktop RAM DDR3-1333 - DIMM - Non-ECC - CL9
- Brand: Kingston
- MPN: KVR1333D3N9H/8G
- Part #: MEMKIN1053799
Product URL: https://www.pbtech.com/product/MEMKIN1053799/returns/promotions/category/components/memory
Features
8GB 2Rx8 1G x 64-Bit PC3-10600
CL9 240-Pin DIMM
This document describes ValueRAM's 1G x 64-bit (8GB) DDR3-1333 CL9 SDRAM (Synchronous DRAM), 2Rx8, memory module, based on sixteen 512M x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1333 timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
- JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
- VDDQ = 1.5V (1.425V ~ 1.575V)
- 667MHz fCK for 1333Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 9, 8, 7, 6
- Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
- Programmable CAS Write Latency(CWL) = 7 (DDR3-1333)
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
- Bi-directional Differential Data Strobe
- Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
- Asynchronous Reset
- PCB: Height 1.18" (30mm), double sided component
Specifications
Capacity
8GB
Type
240-Pin DDR3 SDRAM
Speed
DDR3 1333 (PC3 10600)
Cas Latency
9
Voltage
1.5V
ECC
No
Buffered/Registered
Unbuffered
Features
One 8GB module of 1333MHz DDR3 Memory
Specifically designed and tested for compatibility in various devices
From the industry leader in PC Memory