Creality Accessories Filament Dryer Space Pi for FDM

It does the job but has some limitations:
- it's a sealed box without dessicant so can only remove a limited amount of moisture from filament -- you need to prop the cover open slightly to allow the humidfied warm air to escape if you want maximum drying.
- my unit developed a noisy fan after just a few hours of use (so annoying)
- the touch-screen is decidedly unresponsive
- the menu system is just silly. So many of the material settings produce identical temperature settings it seems a little pointless
- when you open the cover without a spool of filament in it, the whole thing will tip backwards

Bottom line... if you're on a ...view more It does the job but has some limitations:
- it's a sealed box without dessicant so can only remove a limited amount of moisture from filament -- you need to prop the cover open slightly to allow the humidfied warm air to escape if you want maximum drying.
- my unit developed a noisy fan after just a few hours of use (so annoying)
- the touch-screen is decidedly unresponsive
- the menu system is just silly. So many of the material settings produce identical temperature settings it seems a little pointless
- when you open the cover without a spool of filament in it, the whole thing will tip backwards

Bottom line... if you're on a budget, it's okay but there are better options if you're prepared to spend a little more money.

I have used it several times.
The preprogrammed temps are useful. The range of is also considerable.
Can also input manual options too. Can be used alongside to dispense filament straight from the dryer.
If need be, will consider buying another if I need two going at the same time.
Would recommend for entry enthusiasts. I have used it several times.
The preprogrammed temps are useful. The range of is also considerable.
Can also input manual options too. Can be used alongside to dispense filament straight from the dryer.
If need be, will consider buying another if I need two going at the same time.
Would recommend for entry enthusiasts.

Good for drying out yr filaments. A few hints,would be better with one of those small brass bowden tube pushfit connectors on top then the tube wouldnt get pulled into the machine. Also very light filament roll spools get pulled up and jam when nearly empty,Ive put heavy brass tube inside one to keep it rolling,not get tilted Good for drying out yr filaments. A few hints,would be better with one of those small brass bowden tube pushfit connectors on top then the tube wouldnt get pulled into the machine. Also very light filament roll spools get pulled up and jam when nearly empty,Ive put heavy brass tube inside one to keep it rolling,not get tilted

Works well. Really g9od that it was able to sit beside the 3d printer so well. Works well. Really g9od that it was able to sit beside the 3d printer so well.

The dryer is easy to setup and use and has helped make my filament act as if it were brand new. I don't have tons of time to 3d print so using this to increase the quality of my prints helps a lot. The dryer is easy to setup and use and has helped make my filament act as if it were brand new. I don't have tons of time to 3d print so using this to increase the quality of my prints helps a lot.

good priced single dryer that also works as a feeder.
PTFE Tube doesnt lock into place and often pulls out or pulls in.
There are many mods to improve this with printed parts and it will do the job good priced single dryer that also works as a feeder.
PTFE Tube doesnt lock into place and often pulls out or pulls in.
There are many mods to improve this with printed parts and it will do the job

I've been 3D printing for a while and this a must have as it will literally renew old filament that has gotten moisture in to the point of being brand new. It can also be used as an enclosed filament spool, I would recommend one for every 3D printer. I've been 3D printing for a while and this a must have as it will literally renew old filament that has gotten moisture in to the point of being brand new. It can also be used as an enclosed filament spool, I would recommend one for every 3D printer.

Easy to use, with minimal footprint. Highly recommend Easy to use, with minimal footprint. Highly recommend

Well packaged and presented item does what it says it does very happy with my purchase Well packaged and presented item does what it says it does very happy with my purchase

Very good dryer does what it's designed to do with the added benefit of being able to print straight from it solved the issue of vibration through my prints as my printer has a top mounted spool holder Very good dryer does what it's designed to do with the added benefit of being able to print straight from it solved the issue of vibration through my prints as my printer has a top mounted spool holder

Works great Works great

After multiple print failures with ABS (I think that the stuff is cursed), I got one of these. It was worth every penny, is easy to use and makes all the difference with my prints. After multiple print failures with ABS (I think that the stuff is cursed), I got one of these. It was worth every penny, is easy to use and makes all the difference with my prints.