Raspberry Pi Display 1.14inch LCD Module for Raspberry Pi Pico, 65K Colors, 240 x 135, SPI
Out of stock
Raspberry Pi Display 1.14inch LCD Module for Raspberry Pi Pico, 65K Colors, 240 x 135, SPI
- Brand: Raspberry Pi
- MPN: 19340
- Part #: SEVRBP0340
- UPC:
- Brand: Raspberry Pi
- MPN: 19340
- Part #: SEVRBP0340
- UPC:
What PB Tech customers are saying about this product...
See More Reviews"This screen is perfect for my projects"
"Great way to learn how to program for not only children but older people like me."
Features
NOTE: Raspberry Pi Pico is NOT included. The pictures are for reference ONLY.
1.14inch LCD Display Module For Raspberry Pi Pico, 65K RGB Colors, 240×135 Pixels, SPI Interface.
Features:
- 240×135 resolution, IPS screen, 65K RGB colors, clear and colorful displaying effect
- SPI interface, requires minimal IO pins
- 4 x user buttons for easy interacting
LCD and the controller:
- The ST7789VW is a single-chip controller/driver for 262K-color, graphic type TFT-LCD. It consists of 240 source line and 320 gate line driving circuits. The resolution of this LCD is 135(H)RGB x 240(V), it supports horizontal mode and vertical mode, and it doesn't use all the RAM of the controller.
- This LCD accepts 8-bits/9-bits/16-bits/18-bits parallel interface, that are RGB444, RGB565, RGB666. The color format used in demo codes is RGB565.
- This LCD uses a 4-line SPI interface for reducing GPIO and fast speed.LCD
Working Protocol:
Note: Different from the traditional SPI protocol, the data line from the slave to the master is hidden since the device only has a display requirement.
- RESX Is the reset pin, it should be low when powering the module and be higher at other times;;
- CSX is slave chip select, when CS is low, the chip is enabled.
- D/CX is data/command control pin, when DC = 0, write command, when DC = 1, write data
- SDA is the data pin for transmitting RGB data, it works as the MOSI pin of SPI interface;
- SCL work s the SCLK pins of SPI interface.
- SPI communication has data transfer timing, which is combined by CPHA and CPOL.
- CPOL determines the level of the serial synchronous clock at an idle state. When CPOL = 0, the level is Low. However, CPOL has little effect on the transmission.
- CPHA determines whether data is collected at the first clock edge or at the second clock edge of the serial synchronous clock; when CPHL = 0, data is collected at the first clock edge.
- There are 4 SPI communication modes. SPI0 is commonly used, in which CPHL = 0, CPOL = 0.
User Guides, Resoures, please check HERE
Specifications
Reviews
Delivery & Pick-up
Returns & Warranty
Popular Other Single Board Accessories
Google SBC Coral USB Accelerator, Performs high-speed ML...
Raspberry Pi 5 Official M.2 HAT+ M Key Supports 2230 or 2242...
Raspberry Pi 5 Official AI HAT+ 26 TOPS Hailo AI Acceleration...
Raspberry Pi Official Debug Probe, All-In-One USB to Serial Debug...
Raspberry Pi Official USB 3.0 Hub
Raspberry Pi Display 1.14inch LCD Module for Raspberry Pi Pico, 65K Colors, 240 x 135, SPI
- Brand: Raspberry Pi
- MPN: 19340
- Part #: SEVRBP0340
Product URL: https://www.pbtech.com/product/SEVRBP0340/category/tv-av
Features
NOTE: Raspberry Pi Pico is NOT included. The pictures are for reference ONLY.
1.14inch LCD Display Module For Raspberry Pi Pico, 65K RGB Colors, 240×135 Pixels, SPI Interface.
Features:
- 240×135 resolution, IPS screen, 65K RGB colors, clear and colorful displaying effect
- SPI interface, requires minimal IO pins
- 4 x user buttons for easy interacting
LCD and the controller:
- The ST7789VW is a single-chip controller/driver for 262K-color, graphic type TFT-LCD. It consists of 240 source line and 320 gate line driving circuits. The resolution of this LCD is 135(H)RGB x 240(V), it supports horizontal mode and vertical mode, and it doesn't use all the RAM of the controller.
- This LCD accepts 8-bits/9-bits/16-bits/18-bits parallel interface, that are RGB444, RGB565, RGB666. The color format used in demo codes is RGB565.
- This LCD uses a 4-line SPI interface for reducing GPIO and fast speed.LCD
Working Protocol:
Note: Different from the traditional SPI protocol, the data line from the slave to the master is hidden since the device only has a display requirement.
- RESX Is the reset pin, it should be low when powering the module and be higher at other times;;
- CSX is slave chip select, when CS is low, the chip is enabled.
- D/CX is data/command control pin, when DC = 0, write command, when DC = 1, write data
- SDA is the data pin for transmitting RGB data, it works as the MOSI pin of SPI interface;
- SCL work s the SCLK pins of SPI interface.
- SPI communication has data transfer timing, which is combined by CPHA and CPOL.
- CPOL determines the level of the serial synchronous clock at an idle state. When CPOL = 0, the level is Low. However, CPOL has little effect on the transmission.
- CPHA determines whether data is collected at the first clock edge or at the second clock edge of the serial synchronous clock; when CPHL = 0, data is collected at the first clock edge.
- There are 4 SPI communication modes. SPI0 is commonly used, in which CPHL = 0, CPOL = 0.
User Guides, Resoures, please check HERE
Specifications
Operating voltage
2.6 ~ 5.5V
Communication Interface
4-wire SPI
Display Panel
IPS
Driver
ST7789
Resolution
240×135 pixels
Display size
24.91 × 14.86mm
Pixel size
0.1101 × 0.1035mm
Dimensions
52.00 × 25.00mm
