GIVE FEEDBACK

Generating Print Page

Magewell Magewell Pro Convert HDMI TX MG-64050

Limited Supply - only stock on hand available, when sold out we may not be able to source this product again.
This product can only be sold to limited liability companies, local councils, government departments and schools. A limited liability company name or valid council, government department or school name must be entered during the checkout process.

Magewell Magewell Pro Convert HDMI TX MG-64050

  • Brand: Magewell
  • MPN: MG-64050
  • Part #: TAAMGW1014
  • UPC:
  • Brand: Magewell
  • MPN: MG-64050
  • Part #: TAAMGW1014
  • UPC:

Video Type

HDMI Capture

Features

The Pro Convert HDMI TX 1-Channel NDI Encoder from Magewell allows you to convert an HDMI signal with embedded audio to an NDI stream. It supports resolutions up to 2048 x 1200 at 60p on both input and NDI output. The device can be powered via an included power adapter or over PoE using the NDI port. It features a 1/4"-20 thread for camera mounting and can be used in the studio or in the field thanks to a compact and robust design. There's also a PTZ+tally shared mini-DIN port for connecting tally lights or setting up NDI-based PTZ camera control. A tally light accessory comes included.

A companion Web UI allows assigning the device name, source name, and other settings. The encoder also has an on-board SD card slot but it is not functional at the time of this writing. Any future firmware updates will also be accessible via the Web UI.

The Pro Convert HDMI TX Encoder additionally features an adaptive HDMI equalizer that allows for HDMI cables lengths up to 98'.

HDMI Specific Features

- 165 MHz HDMI receiver
- Adaptive HDMI equalizer support for cables lengths up to 98'
- Customized EDID support
- Extraction of AVI/Audio InfoFrames
- Full colorimetry support
- Up to 2048 x 1200 4:4:4/4:2:2 60 fps input signals
- Support for 8-input and 2-output IEC60958 audio streams
- Extraction of audio formation information and channel status data
- Extraction of video timing information
- Extraction of 3D format information
- Side-by-side half, top-and-bottom, and frame packing 3D modes

NDI Output Format

- 4:2:2 8-bit output
- Up to 2048 x 1200 at 60 fps
- Support for NDI 3.x

Supported Web Browsers

- Microsoft Internet Explorer 11
- Microsoft Edge
- Mozilla Firefox version 61 and above
- Google Chrome version 49 and above
- Apple Safari 11.1 and above
- Opera 55.0.2994.44 and above

Supported Software

- OBS
- XSplit
- vMix
- VidBlasterX
- Wirecast
- streamstar SW
- mimoLive
- Any other NewTek NDI-enabled encoding or streaming software

Video Processing Features

- Video processing pipelines with 160 megapixels per second
- Video brightness, contrast, saturation, hue adjustment
- Video de-interlacing: top field only; bottom field only
- Auto or manual selection of output aspect ratio
- Auto or manual selection of input color format and quantization range
- Auto or manual selection of output color format, quantization range, and saturation range
- Support for RGB, YUV BT.601, YUV BT.709, and YUV BT.2020 input color formats
- Support for YUV BT.601, YUV BT.709, and YUV BT.2020 output color formats
- Support for limited or full quantization range
- Support for limited, full, and extended gamut saturation range
- Video frame rate conversion
- Video mirror flip

NDI Source Name

- Set the device name and source name shown in the system using Web UI
- Set board-index, from 0 to F, through an on-board rotary switch

Specifications

Supported Web Browser (tested)

Microsoft Internet Explorer 11
Microsoft Edge
Mozilla Firefox version 61 and above
Google Chrome version 49 and above
Apple Safari 11.1 and above
Opera 55.0.2994.44 and above

Supported Software (tested)

OBS
XSplit
vMix
VidBlasterX
Wirecast
streamstar SW
mimoLive
Any other NewTek NDI-enabled encoding or streaming software

Input Interface

HDMI
- DVI-D 1.0
- HDMI 1.4

Storage Interface

SD Card (functions to be developed)

PTZ + TALLY Control

Mini-DIN-8 jack

Mounting Hole

¼-20 mounting hole

Network Interface

10/100/1000Mbps Ethernet
IEEE 802.3af PoE

USB Interface

USB2.0 Type B
5V/2.1A power supply
USB RNDIS/ECM

Input feature

Support input video resolutions at up to 2048x1200

HDMI Specific Features

165MHz HDMI receiver
Adaptive HDMI equalizer support for cables lengths up to 30M
Support for customized EDID
Support for extraction of AVI/Audio InfoFrames
Full colorimetry support
Support up to 2048x1200 4:4:4/4:2:2 60fps input signals
Support 8 input and 2 output IEC60958 audio streams
Support for extraction of audio formation information & channel status data
Support for extraction of video timing information
Support for extraction of 3D format information
Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.

NDI® Output Format

Support for 4:2:2 8-bit output
Support for up to 2048x1200 60fps
Support for NDI 4.1

Video Processing Features

Video processing pipelines with 160 Mpixels/s
Video brightness, contrast, saturation, hue adjustment
Video de-interlacing
- Top field only
- Bottom field only
Video aspect ratio conversion
- Auto or manual selection of output aspect ratio
Video color format conversion
- Auto or manual selection of input color format & quantization range
- Auto or manual selection of output color format, quantization range & saturation range
- Support for RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input color formats
- Support for YUV BT.601, YUV BT.709, YUV BT.2020 output color formats
- Support for Limited or Full quantization range
- Support for Limited, Full & 'Extended gamut' saturation range
Video frame rate conversion
Video mirror flip

NDI® Source Name

Support for setting the device name shown in the system using Web UI. By default, the device name is 'Pro Convert'.
Support for setting the source name shown in the system using Web UI. By default, the source name is 'board-index + serial number'.
Support for setting board-index, from 0 to F, through on-board rotary switch

Firmware Upgrade

Support for manual update using Web UI

LED Indicator

Status LEDs indicate:
- Power supply indicator: on/off
- Input signal indicator: locked/unlocked

Form Factor

100.9smm (L) x 60.2mm (W) x 23.3mm (H)

Accessories

USB 2.0 A to B Cable
5V/2.1A power adaptor
Mini-DIN-8 (PTZ + TALLY) to RS232 (PTZ) + Mini-DIN-8 (TALLY)
Tally lights
L-bracket
LED matrix panel (optional)

Power Consumption

5V max current: ~1.5A
Max power consumption: ~6W

Working Environment

Operating temperature: 0 to 45 deg C
Storage temperature: -20 to 70 deg C
Relative Humidity: 5% to 90% non-condensing

Manufacturer Part No:
MG-64050
Brand:
Magewell
Product Type:
-
UPC
-
Product Family:
-
Shipping Weight:
0.5 kg
PB Part No:
TAAMGW1014
Product Model:
-
Warranty: 12 months *
* Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
All warranties are return to base unless otherwise specified.

Reviews

There are currently no reviews for this product

Do you own this product?

Write a review and go into the monthly draw Win A $100 PB Tech Gift Card!

Delivery & Pick-up

Shipping Costs

Shipping costs vary based on your location and the items being shipped and in some cases shipping may even be FREE.

To calculate what the shipping costs will be for your order, add the items you are interested in to your cart, view the Shopping Cart page, and select your 'Delivery Area' to calculate the shipping cost.

Shipping Security & Insurance

All orders shipped by PB Tech are sent via a courier with a signature required for each delivery. In some cases, and only where you have given the courier company permission to leave orders at a designated location, your order may be delivered without requiring a signature. All orders sent by PB Tech are fully insured in the unlikely event that your item(s) are damaged or go missing in transit.

Delivery Estimates

The delivery time-frame (in days) for each product we sell is detailed on the individual product page just to the right of the main product image. From when you place your order, in-stock products typically arrive within 7-10 working days for all countries that we ship to.

Overseas Shipments

If you are located in New Zealand, you can order directly from our New Zealand site www.pbtech.co.nz. If you are located in Australia you can order directly from our Australian website www.pbtech.com/au

Returns & Warranty

7 day right of exchange

If you change your mind after making a purchase, or realise you have ordered the incorrect item, you can enjoy the peace of mind that we offer a 7 day exchange policy.

To exchange a product, goods must be sealed / unopened, with packaging in original condition, and accompanied by a valid receipt dated no more than 7 calendar days from when you request an exchange.

If there is not a suitable product that can be exchanged for your returned item you will be offered a credit on your account or gift card based on the value paid at the time of purchase.

Please note, items purchased on finance cannot be exchanged for a gift card.

 

Hassle free warranty service

If your product develops a fault within the manufacturer warranty period, you need to fill out our request a return form.

If your product develops a fault outside of the manufacturer warranty or PB Tech warranty period, we offer a full repair service and are an authorised repair agent for leading brands such as Samsung, HP, Toshiba, Lenovo and more.

 

Returning a product / making a warranty claim

To return a product to PB Tech, please complete our request a return form.

Or view our returns policy for more information.

Magewell Magewell Pro Convert HDMI TX MG-64050

  • Brand: Magewell
  • MPN: MG-64050
  • Part #: TAAMGW1014
AUD $743.72

Date Created: 11:03, 29-03-2024
Product URL: https://www.pbtech.com/product/TAAMGW1014/Magewell-MG-64050-Magewell-Pro-Convert-HDMI-TX

Features

The Pro Convert HDMI TX 1-Channel NDI Encoder from Magewell allows you to convert an HDMI signal with embedded audio to an NDI stream. It supports resolutions up to 2048 x 1200 at 60p on both input and NDI output. The device can be powered via an included power adapter or over PoE using the NDI port. It features a 1/4"-20 thread for camera mounting and can be used in the studio or in the field thanks to a compact and robust design. There's also a PTZ+tally shared mini-DIN port for connecting tally lights or setting up NDI-based PTZ camera control. A tally light accessory comes included.

A companion Web UI allows assigning the device name, source name, and other settings. The encoder also has an on-board SD card slot but it is not functional at the time of this writing. Any future firmware updates will also be accessible via the Web UI.

The Pro Convert HDMI TX Encoder additionally features an adaptive HDMI equalizer that allows for HDMI cables lengths up to 98'.

HDMI Specific Features

- 165 MHz HDMI receiver
- Adaptive HDMI equalizer support for cables lengths up to 98'
- Customized EDID support
- Extraction of AVI/Audio InfoFrames
- Full colorimetry support
- Up to 2048 x 1200 4:4:4/4:2:2 60 fps input signals
- Support for 8-input and 2-output IEC60958 audio streams
- Extraction of audio formation information and channel status data
- Extraction of video timing information
- Extraction of 3D format information
- Side-by-side half, top-and-bottom, and frame packing 3D modes

NDI Output Format

- 4:2:2 8-bit output
- Up to 2048 x 1200 at 60 fps
- Support for NDI 3.x

Supported Web Browsers

- Microsoft Internet Explorer 11
- Microsoft Edge
- Mozilla Firefox version 61 and above
- Google Chrome version 49 and above
- Apple Safari 11.1 and above
- Opera 55.0.2994.44 and above

Supported Software

- OBS
- XSplit
- vMix
- VidBlasterX
- Wirecast
- streamstar SW
- mimoLive
- Any other NewTek NDI-enabled encoding or streaming software

Video Processing Features

- Video processing pipelines with 160 megapixels per second
- Video brightness, contrast, saturation, hue adjustment
- Video de-interlacing: top field only; bottom field only
- Auto or manual selection of output aspect ratio
- Auto or manual selection of input color format and quantization range
- Auto or manual selection of output color format, quantization range, and saturation range
- Support for RGB, YUV BT.601, YUV BT.709, and YUV BT.2020 input color formats
- Support for YUV BT.601, YUV BT.709, and YUV BT.2020 output color formats
- Support for limited or full quantization range
- Support for limited, full, and extended gamut saturation range
- Video frame rate conversion
- Video mirror flip

NDI Source Name

- Set the device name and source name shown in the system using Web UI
- Set board-index, from 0 to F, through an on-board rotary switch

Specifications

Supported Web Browser (tested)

Microsoft Internet Explorer 11
Microsoft Edge
Mozilla Firefox version 61 and above
Google Chrome version 49 and above
Apple Safari 11.1 and above
Opera 55.0.2994.44 and above

Supported Software (tested)

OBS
XSplit
vMix
VidBlasterX
Wirecast
streamstar SW
mimoLive
Any other NewTek NDI-enabled encoding or streaming software

Input Interface

HDMI
- DVI-D 1.0
- HDMI 1.4

Storage Interface

SD Card (functions to be developed)

PTZ + TALLY Control

Mini-DIN-8 jack

Mounting Hole

¼-20 mounting hole

Network Interface

10/100/1000Mbps Ethernet
IEEE 802.3af PoE

USB Interface

USB2.0 Type B
5V/2.1A power supply
USB RNDIS/ECM

Input feature

Support input video resolutions at up to 2048x1200

HDMI Specific Features

165MHz HDMI receiver
Adaptive HDMI equalizer support for cables lengths up to 30M
Support for customized EDID
Support for extraction of AVI/Audio InfoFrames
Full colorimetry support
Support up to 2048x1200 4:4:4/4:2:2 60fps input signals
Support 8 input and 2 output IEC60958 audio streams
Support for extraction of audio formation information & channel status data
Support for extraction of video timing information
Support for extraction of 3D format information
Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.

NDI® Output Format

Support for 4:2:2 8-bit output
Support for up to 2048x1200 60fps
Support for NDI 4.1

Video Processing Features

Video processing pipelines with 160 Mpixels/s
Video brightness, contrast, saturation, hue adjustment
Video de-interlacing
- Top field only
- Bottom field only
Video aspect ratio conversion
- Auto or manual selection of output aspect ratio
Video color format conversion
- Auto or manual selection of input color format & quantization range
- Auto or manual selection of output color format, quantization range & saturation range
- Support for RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input color formats
- Support for YUV BT.601, YUV BT.709, YUV BT.2020 output color formats
- Support for Limited or Full quantization range
- Support for Limited, Full & 'Extended gamut' saturation range
Video frame rate conversion
Video mirror flip

NDI® Source Name

Support for setting the device name shown in the system using Web UI. By default, the device name is 'Pro Convert'.
Support for setting the source name shown in the system using Web UI. By default, the source name is 'board-index + serial number'.
Support for setting board-index, from 0 to F, through on-board rotary switch

Firmware Upgrade

Support for manual update using Web UI

LED Indicator

Status LEDs indicate:
- Power supply indicator: on/off
- Input signal indicator: locked/unlocked

Form Factor

100.9smm (L) x 60.2mm (W) x 23.3mm (H)

Accessories

USB 2.0 A to B Cable
5V/2.1A power adaptor
Mini-DIN-8 (PTZ + TALLY) to RS232 (PTZ) + Mini-DIN-8 (TALLY)
Tally lights
L-bracket
LED matrix panel (optional)

Power Consumption

5V max current: ~1.5A
Max power consumption: ~6W

Working Environment

Operating temperature: 0 to 45 deg C
Storage temperature: -20 to 70 deg C
Relative Humidity: 5% to 90% non-condensing

Date Created: 11:03, 29-03-2024
Product URL: https://www.pbtech.com/product/TAAMGW1014/Magewell-MG-64050-Magewell-Pro-Convert-HDMI-TX