Ubiquiti Unifi Access G3 Reader - Black (UA-G3-B)
Ubiquiti Unifi Access G3 Reader - Black (UA-G3-B)
- Brand: Ubiquiti
- MPN: UA-G3-B
- Part #: CCTUBI830101
- UPC: 810084697603
View all shipping info
- Brand: Ubiquiti
- MPN: UA-G3-B
- Part #: CCTUBI830101
- UPC: 810084697603
Features
Specifications
Reviews
Delivery & Pick-up
Returns & Warranty
Popular Access Control





Ubiquiti Unifi Access G3 Reader - Black (UA-G3-B)
- Brand: Ubiquiti
- MPN: UA-G3-B
- Part #: CCTUBI830101
- UPC:810084697603

Product URL: https://www.pbtech.com/au/product/CCTUBI830101/Ubiquiti-Unifi-Access-G3-Reader---Black-UA-G3-B?qr=related-view
Features
G3 Reader
Compact third-generation access reader with Apple Touch Pass support.
- Unlock with an NFC card, UniFi Identity mobile app, or Touch Pass*
- Supports hand-wave unlocking as a request-to-exit device
- Provides entry and exit greeting messages
- IP55-rated weather resistance (-30 to 45°C)
- Connects to UniFi Access Hub via PoE
Specifications
Mechanical
Dimensions
93 x 40 x 36.5 mm (3.7 x 1.6 x 1.4")
Weight
82 g (2.9 oz)
Enclosure material
Polycarbonate, glass
Mounting material
Aluminum alloy
Mounting
In wall, gang box
Weatherproofing
IP55
Hardware
Networking interface
(1) 10/100 MbE RJ45 port
Connectivity
BLE 4.1
NFC
Power method
PoE
UL 294 Power-limited Class 2 PSU
UL 60950-1/62368-1 LPS/PS2 PSU
Supported voltage range
48V DC
Max. power consumption
5W
ESD/EMP protection
Air: ±15kV, contact: ±8kV
Sensors
Proximity sensor
Speaker
(1) 8 ohm, 0.7W
LEDs
R/G/B/W
Button
(1) Factory-reset
NFC frequency
13.56 MHz
NFC read range
< 30 mm
NFC technology
ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340)
MIFARE Classic / MIFARE DESFIRE
Sony FeliCa™ (ID only)
NFC Forum tags T1T, T2T, T3T, T4T and T5T
ECP 2.0
Operating environment
Outdoor use
Ambient operating temperature
-30 to 45° C (-22 to 113° F)
Ambient operating humidity
5 to 90% noncondensing
Software information
The software version of a product can be checked at https://unifi.ui.com
UL 294 level
Destructive attack: Level I
Line security: Level I
Endurance: Level I
Standby power: Level I
UL 294 statement
Compliance with IEEE 802.3 specifications was not verified as part of UL 294.
The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
PoE cabling requirements
Cable 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site.
The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm 2 ) for patch cords; 24 AWG (0.21 mm 2 ) for horizontal or riser cable.
CAN/ULC-60839-11-1
Grade Grade assignment: I
Certifications
CE, FCC, IC, UL 294, CAN/ULC-60839-11-1
Document number, and issue date and/or revision level
UA-G3, V01
Software
Management application
UniFi Access: Version 3.0.15 and later