Antec CX200M RGB ELITE Black MidTower mATX Gaming Case Tempered Glass, 5 x Fixed Mode RGB 120mm Fan Pre-Installed, CPU Cooler Support Upto 164mm, GPU Support Upto 330mm,4x PCI Slot, Front I/O: 2XUSB 3.0, HD Audio

Very good for the price, 100% wait for a sale though it can drop 20ish dollars. Be sure to check the dimensions of everything, especially where the pcie slot is on your motherboard and how tall your gpu is, the clearance between the bottom of the gpu and the bottom fans is quite low, and on some gpus/motherboards you might have to remove them like I did unfortunately. Its also worth noting that the fans are either 100% on or completely off, so it can get sorta loud if that's a priority you might have to get different fans.
Even without the bottom 2 fans the mesh at the bottom means the temps are fine anyways so I doesn't matter that much.
Hon...view more Very good for the price, 100% wait for a sale though it can drop 20ish dollars. Be sure to check the dimensions of everything, especially where the pcie slot is on your motherboard and how tall your gpu is, the clearance between the bottom of the gpu and the bottom fans is quite low, and on some gpus/motherboards you might have to remove them like I did unfortunately. Its also worth noting that the fans are either 100% on or completely off, so it can get sorta loud if that's a priority you might have to get different fans.
Even without the bottom 2 fans the mesh at the bottom means the temps are fine anyways so I doesn't matter that much.
Honestly the best fish tank styled case I could find at this price point.

Not super difficult to build in and it looks super tidy Not super difficult to build in and it looks super tidy

This is an awesome case if your flipping pcs, making a budget pc, Or if you want to spend more money on higher end parts instead of spending hundreds of dollars on a case.
I purchased the white variant and it looked awesome with my Deepcool AK400 and my black 1660.
For beginners the manual is a bit confusing as it doesn't tell you which screws are for what. I had to look up online, Which in my opinion isn't a difficult task.
The fans only light up with one colour, the LED button on the side panel just turns them on and off. They are powered by MOLEX connecters.
It comes with extra PCIE brackets.
Didnt take me long to cable manage - Als...view more This is an awesome case if your flipping pcs, making a budget pc, Or if you want to spend more money on higher end parts instead of spending hundreds of dollars on a case.
I purchased the white variant and it looked awesome with my Deepcool AK400 and my black 1660.
For beginners the manual is a bit confusing as it doesn't tell you which screws are for what. I had to look up online, Which in my opinion isn't a difficult task.
The fans only light up with one colour, the LED button on the side panel just turns them on and off. They are powered by MOLEX connecters.
It comes with extra PCIE brackets.
Didnt take me long to cable manage - Also comes with extra zipties.

By: shmyasir 18/04/25

Verified Owner

All 5 fans connect via daisy-chained molex power plug. Very quiet. Case is small, but robust. Can fit mATX MB, though can only make use of GFX card slot, so don't expect to put a lot of extra cards into this case.
The RGB lights look nice. Can be a bit difficult to get cables plugged in though as the case is small. All 5 fans connect via daisy-chained molex power plug. Very quiet. Case is small, but robust. Can fit mATX MB, though can only make use of GFX card slot, so don't expect to put a lot of extra cards into this case.
The RGB lights look nice. Can be a bit difficult to get cables plugged in though as the case is small.

I got my pc upgrade and assemble at pb tech St lukes. The product is great, very stylish and love the overall look. Unfortunately the RBG fan lights cant be controlled.
It would be excellent if RBG fan was connected to switch or Mother Board to control RBG Fan lights. I got my pc upgrade and assemble at pb tech St lukes. The product is great, very stylish and love the overall look. Unfortunately the RBG fan lights cant be controlled.
It would be excellent if RBG fan was connected to switch or Mother Board to control RBG Fan lights.

Overall, if you are looking for a budget case that is easy to build in, this is your case. I have build in multiple cases, from very budget and mid-range and this is surprisingly great.
Here are some areas I found either good or bad while working in the case.

Positives:
- Large cabling gap between Motherboard and Side Panel
- Cabling Cutouts are quite spaced out, leaving plenty of room for cabling above, below and right side of Motherboard
- Basement area is quite ventilated with room for one HDD and SSD.
- The Acrylic panels are a nice touch with the Antec logo on the side.

Negatives:
- The fans are ONLY MOLEX. This means the fan...view more Overall, if you are looking for a budget case that is easy to build in, this is your case. I have build in multiple cases, from very budget and mid-range and this is surprisingly great.
Here are some areas I found either good or bad while working in the case.

Positives:
- Large cabling gap between Motherboard and Side Panel
- Cabling Cutouts are quite spaced out, leaving plenty of room for cabling above, below and right side of Motherboard
- Basement area is quite ventilated with room for one HDD and SSD.
- The Acrylic panels are a nice touch with the Antec logo on the side.

Negatives:
- The fans are ONLY MOLEX. This means the fans are running all the time at 100% with no control. Ideally, fans should have 3 or 4 pin pin connectors to allow Motherboard Control. There is also no way to plug these fans into the Motherboard or fan hub.
- The number of fans is pretty overkill for the size of the case, especially the two at the bottom. Currently there is 4 intake fans top/bottom and only one extract fan.
- Definitely have to buy 3 new 4 pin fans due to the above limitations.
- The PCI slots are hard mounted, so you need to bend them off and file down the sharp areas. But they included extra slot covers.

Too many fans.

On button gets stuck if you don't press it directly in the center and will then turn your pc off again straight away.

Overall a pretty good case for the money. Too many fans.

On button gets stuck if you don't press it directly in the center and will then turn your pc off again straight away.

Overall a pretty good case for the money.

I built my son his first gaming PC with this case. Great fans and LEDs. Excellent price. Highly recommended! I built my son his first gaming PC with this case. Great fans and LEDs. Excellent price. Highly recommended!

Good case for a mATX board and 5 fans included, now that is WOW, and 2 are reverse so you don't have the ugly back ends facing up, good air flow and also space for a cpu air cooler. Good case for a mATX board and 5 fans included, now that is WOW, and 2 are reverse so you don't have the ugly back ends facing up, good air flow and also space for a cpu air cooler.