Kingston 8GB DDR3 Desktop RAM
1866MHz - Non-ECC - CL 10
What PB Tech customers are saying about this product...
See More Reviews"Bought 8GB of Kingston DDR3 memory for a desktop and installed it a couple of weeks ago. The Hyper Fury card slotted straight in no fuss and hasn't missed a beat. Recommended."
Features
Specifications
Reviews
Delivery & Pick-up
Returns & Warranty
Popular Desktop RAM
Kingston 8GB DDR3 Desktop RAM 1866MHz - Non-ECC - CL 10
- Brand: Kingston
- MPN: HX318C10F/8
- Part #: MEMKIN2597002
- UPC:740617230543
Product URL: https://www.pbtech.com/au/product/MEMKIN2597002/product/MEMCOR70224/imglib/footer/education.png
Features
Kingston HyperX FURY 8GB 1866MHz
8GB 1G x 64-Bit DDR3-1866
CL10 240-Pin DIMM
HyperX HX318C10F/8 is a 1G x 64-bit (8GB) DDR3-1866 CL10 SDRAM (Synchronous DRAM) 2Rx8 memory module, based on sixteen 512M x 8-bit DDR3 FBGA components. This module has been tested to run at DDR3-1866 at a low latency timing of 10-11-10 at 1.5V. Additional timing parameters are shown in the PnP Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows:
PnP JEDEC TIMING PARAMETERS
- DDR3-1866 CL10-11-10 @1.5V
- DDR3-1600 CL9-10-9 @1.5V
- DDR3-1333 CL8-9-8 @1.5V
Features
- JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
- VDDQ = 1.5V (1.425V ~ 1.575V)
- 933MHz fCK for 1866Mb/sec/pin
- 8 independent internal bank
- Programmable CAS Latency: 13, 11, 10, 9, 8, 7, 6
- Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
- 8-bit pre-fetch
- Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS]
- Bi-directional Differential Data Strobe
- Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ± 1%)
- On Die Termination using ODT pin
- Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
- Asynchronous Reset
- Height 1.291" (32.80mm) w/heatsink, double sided component
Specifications
CL(IDD)
10 cycles
Row Cycle Time (tRCmin)
44.75ns (min.)
Refresh to Active/Refresh Command Time (tRFCmin)
260ns (min.)
Row Active Time (tRASmin)
32.125ns (min.)
Maximum Operating Power
TBD W*
UL Rating
94 V - 0
Operating Temperature
0 C to 85 C
Storage Temperature
-55 C to +100 C