Cisco Meraki MA-INJ-5-AU Multigigabit 802.3AT POE Injector - AU Plug
Out of stock
Cisco Meraki MA-INJ-5-AU Multigigabit 802.3AT POE Injector - AU Plug
- Brand: Cisco Meraki
- MPN: MA-INJ-5-AU
- Part #: NETCIS3289305
- UPC:
- Brand: Cisco Meraki
- MPN: MA-INJ-5-AU
- Part #: NETCIS3289305
- UPC:
Features
Specifications
Reviews
Delivery & Pick-up
Returns & Warranty
Popular POE Splitters / Injectors
Cisco Meraki MA-INJ-5-AU Multigigabit 802.3AT POE Injector - AU Plug
- Brand: Cisco Meraki
- MPN: MA-INJ-5-AU
- Part #: NETCIS3289305
Product URL: https://www.pbtech.com/au/product/NETCIS3289305/Cisco-Meraki-MA-INJ-5-AU-Multigigabit-8023AT-POE-I?qr=country-selector
Features
Increased Flexibility, Reduced Installation Time and Cost One of the main constraints when designing your wireless network is the availability of power. Running power cabling is also a primary cost driver of wireless installations. The Meraki multigigabit PoE injector allows delivery of both data and power to a Meraki access point over a single Ethernet cable, allowing deployment of devices exactly where they are needed to provide the best wireless coverage at a much lower installation cost. The Meraki Multigigabit 802.3at PoE Injector provides fully-compliant 802.3at detection, with disconnect, short-circuit and overload protection. This ensures that only 802.3at and 802.3af devices receive power and non-compliant devices are not accidentally damaged. Using this injector, it is possible to power the latest generation of 802.11ac devices that require 802.3at power delivered via multigigabit interfaces, as well as providing backward compatibility with legacy 802.11n devices with traditional 802.3af power. Regardless of the deployment scenario, powering Meraki devices with multigigabit 802.3at Power over Ethernet is a flexible and low-cost method to simplify the installation process while ensuring that network design is not compromised by power availability limitations.
Specifications
Input voltage:
100 to 240 VAC
Maximal input current:
1.5A
AC input frequency:
50-60 Hz
Output voltage:
55 VDC
Maximum output power:
30W
Note:
Powered device can be up to 100m away from power injector
Data
Compatible with Ethernet 10/100/1000 Mbps & 10 Gbps Multigigabit Ethernet
Operating templerature:
-10 to 45 °C (14 to 113°F)
Storage temperature:
-40 to 70 °C (-40 to 158°F)
Operating humidity:
Maximum 90%
Additional features
Short-circuit protection
Physical dimensions
166 mm x 87.9 mm x 43 mm (6.53" x 3.46" x 1.68")
Weight:
410 g (0.91 lb)
Mounting
Mounts to walls (anchors and screws not included)
Compatibility
Complies with IEEE 802.3at standard
Backward compatibility with 802.3af devices
LED indicators
Input power
Detected/connected to valid 802.3at load
Power and load detection diagnostic LEDs