MSI MAG PANO M100R PZ Black mATX Gaming Case Tempered Glass with 4x ARGB Fans CPU Cooler Support Upto 175mm, GPU Support Upto 390mm, 5x PCI Slot, 360mm Radiator Supported, Front I/O: 2x USB, HD Audio

My previous case had my GPU running at 80C+. The same GPU in this case runs at 65C.

It comes with a really great fan controller and some decent fans, also included is a GPU anti sag thing.

Its incredible value for the price and effortless to create a system that looks amazing. If you have an MATX motherboard, this case is a no brainer.

I would give this 5/5 but im going to give it 4/5 because the usb 3.0 cable is at a right angle , meaning it was rather awkward to connect into the case. My previous case had my GPU running at 80C+. The same GPU in this case runs at 65C.

It comes with a really great fan controller and some decent fans, also included is a GPU anti sag thing.

Its incredible value for the price and effortless to create a system that looks amazing. If you have an MATX motherboard, this case is a no brainer.

I would give this 5/5 but im going to give it 4/5 because the usb 3.0 cable is at a right angle , meaning it was rather awkward to connect into the case.

Doing a basic gaming PC build and bought the case to go with an MSI mobo and gaming monitor. Specifically for the ARGB fans and LED controller.

Pros:
- Looks great with the four ARGBs
- Great cooling
- Simple, straight forward build

Cons:
-Power button literally broken (leading to some doubtful and stressful moments

Conclusion:
Good all around, just check the power button if it doesn't work out of box. Doing a basic gaming PC build and bought the case to go with an MSI mobo and gaming monitor. Specifically for the ARGB fans and LED controller.

Pros:
- Looks great with the four ARGBs
- Great cooling
- Simple, straight forward build

Cons:
-Power button literally broken (leading to some doubtful and stressful moments

Conclusion:
Good all around, just check the power button if it doesn't work out of box.

The case supports motherboards that have most of the main connections on the back of the board. This can result in an almost cordless build. I don't have one of those MBD so not as clean but still very clean. The rgb is great and the case houses all wires well. The ARGB control hub is pretty scuffed looking, It's just an exposed board that doesn't match the same aestethic of the case. (doesn't matter coz no one can see it anyway).
MBD: Gigabyte B650m Gaming Plus The case supports motherboards that have most of the main connections on the back of the board. This can result in an almost cordless build. I don't have one of those MBD so not as clean but still very clean. The rgb is great and the case houses all wires well. The ARGB control hub is pretty scuffed looking, It's just an exposed board that doesn't match the same aestethic of the case. (doesn't matter coz no one can see it anyway).
MBD: Gigabyte B650m Gaming Plus

Genuinely love the look of it and its io location, but it was heart breaking when I realized my current motherboard did not fit.... Filled a return form then decided to keep it - time to upgrade anyway. (forgot to login before review) Genuinely love the look of it and its io location, but it was heart breaking when I realized my current motherboard did not fit.... Filled a return form then decided to keep it - time to upgrade anyway. (forgot to login before review)

Replaced the fans it comes with six of my own SL-INF 120s (three in, three out). I would consider getting reverse blade fans for the side intake if you plan to replace the stock ones as it may look nicer than seeing the frame on the back of normal fans.

Switched to this case from the Antec DP301M in which my TUF 3080 would previously run at around 70C (at the least, from memory) or more, whereas with this case the same GPU barely peaks at 63C. I know that my GPU peaks at 60C in an open case environment so this case is far from suffocating like I'd consider my last one to be.

Two of my gripes with this case would be that it's a little hard...view more Replaced the fans it comes with six of my own SL-INF 120s (three in, three out). I would consider getting reverse blade fans for the side intake if you plan to replace the stock ones as it may look nicer than seeing the frame on the back of normal fans.

Switched to this case from the Antec DP301M in which my TUF 3080 would previously run at around 70C (at the least, from memory) or more, whereas with this case the same GPU barely peaks at 63C. I know that my GPU peaks at 60C in an open case environment so this case is far from suffocating like I'd consider my last one to be.

Two of my gripes with this case would be that it's a little hard to pick up without touching the glass as the support at the front is a full block of sorts rather than two legs (more inconvenient the heavier your components). Secondly, the USB 3.0 cable is indeed at a right-angle so if you're not using the PROJECT ZERO motherboard from MSI it's a bit of an awkward fit.

Otherwise It looks great and is easy to build in (more so if you have the PROJECT ZERO board), five stars

By: Ricci03 29/03/24

Verified Owner

It looks so good, but it's so easy to build in as well! I'm so happy with it, I genuinely couldn't be happier. It looks so good, but it's so easy to build in as well! I'm so happy with it, I genuinely couldn't be happier.

Loving this new case from MSI. Was an absolute breeze to build in, without even the new Project Zero motherboard cable management is amazing. I think for the price this Case is amazing with all its features. I highly recommend this case :) Loving this new case from MSI. Was an absolute breeze to build in, without even the new Project Zero motherboard cable management is amazing. I think for the price this Case is amazing with all its features. I highly recommend this case :)

m-ATX board with a two-fan radiator and an Nvidea 4060 fits beautifully and looks great. The RGB controller that comes attached makes case lighting hassle-free. No complaints at all and worked great for a two-tone build. m-ATX board with a two-fan radiator and an Nvidea 4060 fits beautifully and looks great. The RGB controller that comes attached makes case lighting hassle-free. No complaints at all and worked great for a two-tone build.

best PC case sick build with rtx 4080 and i9400k intel cpu and 4 RGB fans that a big steal best PC case sick build with rtx 4080 and i9400k intel cpu and 4 RGB fans that a big steal

Genuinely love the look of it and its io location, but it was heart breaking when I realized my current motherboard did not fit.... Filled a return form then decided to keep it - time to upgrade anyway. Genuinely love the look of it and its io location, but it was heart breaking when I realized my current motherboard did not fit.... Filled a return form then decided to keep it - time to upgrade anyway.

My son loves it , My son loves it ,

Amazing build quality and easy installation, if you want a low price fish tank design. Amazing build quality and easy installation, if you want a low price fish tank design.