MOXA TCC-82 Port-powered RS-232 isolator with 4 kV isolation and 15 KV serial ESD protection
MOXA TCC-82 Port-powered RS-232 isolator with 4 kV isolation and 15 KV serial ESD protection
- Brand: MOXA
- MPN: TCC-82
- Part #: IPCMXATCC800005
- UPC:
View all shipping info
- Brand: MOXA
- MPN: TCC-82
- Part #: IPCMXATCC800005
- UPC:
Features
The TCC-82 provides full electrical isolation for bidirectional serial communication between two RS-232 devices in a compact, industrial-grade package. Both sides of an RS-232 connection are isolated optically to provide perfect protection against lightning surges, accidental high-voltage shorts, and ground loops. The built-in, wide range isolators are tested to ensure that they can withstand more than 4 kV rms input to output for one minute. This means that the TCC-82 not only meets the requirements of general serial data communications, but also the high standards required by industrial automation and medical applications. The TCC-82 protects the TxD and RxD data lines, and it also protects the RTS and CTS handshake lines for a total of four isolated channels to provide complete protection of your RS-232 applications.
External Power Source Not Required
The TCC-82 supports port-powered operation, which means that it can obtain power directly from the attached serial devices. Power is obtained from the RS-232 TxD, RTS, or DTR lines, regardless of whether the signal is high or low, eliminating the need for an external power supply. However, external power can be used if handshake lines are not available, if the serial cable is too long, or if the serial device is a low-power device. For external power, the TCC-82 can use a 5 to 12 VDC adapter or a USB power cord. Note that both sides of the connection are powered independently, so if necessary, one side can rely on port power and the other on an external power source.
When installing the TCC-82, we recommend that you connect all output signals. The TCC-82 obtains power from these signals even if they are not used by your system. Care should be taken when choosing the external power supply if your application requires the full 4 kV of isolation. Most commercial power supplies provide only 1500 VAC isolation between the primary and secondary windings. If you are using external power for both sides of the TCC-82, make sure that separate power sources are used, each with sufficient isolation protection.
- Four channels of 4 kV RMS isolation for 1 minute
- External power source supported but not required
- Automatic baudrate detection
- Compact size
Specifications
Reviews
Delivery & Pick-up
.
Shipping Costs
Shipping costs vary based on your location and the items being shipped and in some cases shipping may even be FREE.
To calculate what the shipping costs will be for your order, add the items you are interested in to your cart, view the Shopping Cart page, and select your 'Delivery Area' to calculate the shipping cost.
Shipping Security and Insurance
All orders shipped by PB Tech are sent via a courier with a signature required for each delivery. In some cases, and only where you have given the courier company permission to leave orders at a designated location, your order may be delivered without requiring a signature. All orders sent by PB Tech are fully insured in the unlikely event that your item(s) are damaged or go missing in transit.
Delivery Estimates
The delivery time-frame (in days) for each product we sell is detailed on the individual product page just to the right of the main product image. From when you place your order, for DHL express delivery in-stock products typically arrive within 2-3 working days for metro areas and 3-5 working days for rural areas. For Standard delivery in-stock products typically arrive within 3-7 working days for NSW, VIC, ACT, QLD and SA deliveries and 5-10 working days for WA, TAS and NT.
Overseas Shipments
If you are located in New Zealand, you can order directly from our New Zealand site www.pbtech.co.nz. If you are from another country you can order from www.pbtech.com
Returns & Warranty
Popular Connectivity
JimiLab Vehicle Trackers VL 512 OBD II Play &Plug Tracker 4G with...
MOXA Universal Controller ioLogik E1212 Universal I/O, 8 DIs, 8...
JimiLab VL103M LTE Vehicle Tracker, LTE & GSM Network;Driving...
MOXA NPort 5110A 1-port RS-232 device server, 0 to 60°C operating...
MOXA UPort 1250 USB to 2-port RS-232/422/485 serial hub USB-to...
MOXA TCC-82 Port-powered RS-232 isolator with 4 kV isolation and 15 KV serial ESD protection
- Brand: MOXA
- MPN: TCC-82
- Part #: IPCMXATCC800005
Product URL: https://www.pbtech.com/au/product/IPCMXATCC800005/MOXA-TCC-82-Port-powered-RS-232-isolator-with-4-kV
Features
The TCC-82 provides full electrical isolation for bidirectional serial communication between two RS-232 devices in a compact, industrial-grade package. Both sides of an RS-232 connection are isolated optically to provide perfect protection against lightning surges, accidental high-voltage shorts, and ground loops. The built-in, wide range isolators are tested to ensure that they can withstand more than 4 kV rms input to output for one minute. This means that the TCC-82 not only meets the requirements of general serial data communications, but also the high standards required by industrial automation and medical applications. The TCC-82 protects the TxD and RxD data lines, and it also protects the RTS and CTS handshake lines for a total of four isolated channels to provide complete protection of your RS-232 applications.
External Power Source Not Required
The TCC-82 supports port-powered operation, which means that it can obtain power directly from the attached serial devices. Power is obtained from the RS-232 TxD, RTS, or DTR lines, regardless of whether the signal is high or low, eliminating the need for an external power supply. However, external power can be used if handshake lines are not available, if the serial cable is too long, or if the serial device is a low-power device. For external power, the TCC-82 can use a 5 to 12 VDC adapter or a USB power cord. Note that both sides of the connection are powered independently, so if necessary, one side can rely on port power and the other on an external power source.
When installing the TCC-82, we recommend that you connect all output signals. The TCC-82 obtains power from these signals even if they are not used by your system. Care should be taken when choosing the external power supply if your application requires the full 4 kV of isolation. Most commercial power supplies provide only 1500 VAC isolation between the primary and secondary windings. If you are using external power for both sides of the TCC-82, make sure that separate power sources are used, each with sufficient isolation protection.
- Four channels of 4 kV RMS isolation for 1 minute
- External power source supported but not required
- Automatic baudrate detection
- Compact size
Specifications
Serial Interface
Connector
DB9 male
No. of Ports
2
Serial Standards
RS-232
Baudrate
50 bps to 921.6 kbps (supports non-standard baudrates)
Serial Signals
RS-232
TxD, RxD, RTS, CTS, GND
Power Parameters
Input Current
5 to 12 VDC, 20 mA (max.)
Input Voltage
5 to 12 VDC
No. of Power Inputs
1
Overload Current Protection
Supported
Source of Input Power
Power input jack
Physical Characteristics
Housing
Plastic
IP Rating
IP30
Dimensions
42 x 80 x 23.6 mm (1.65 x 3.15 x 0.93 in)
Weight
60 g (0.13 lb)
Installation
Desktop
Environmental Limits
Operating Temperature
0 to 60°C (32 to 140°F)
Storage Temperature (package included)
-20 to 75°C (-4 to 167°F)
Ambient Relative Humidity
5 to 95% (non-condensing)
