Tamiya 58731 1/10 MERCEDES CLK GT-R (TC-01) EXCL ESC
Tamiya 58731 1/10 MERCEDES CLK GT-R (TC-01) EXCL ESC
- Brand: Tamiya
- MPN: Tamiya 58731
- Part #: MDLTMA58731
- UPC:
View all shipping info
- Brand: Tamiya
- MPN: Tamiya 58731
- Part #: MDLTMA58731
- UPC:
Features
This R/C model assembly kit recreates the Mercedes-Benz CLK-GTR car which took six wins in dominating the 1997 FIA GT Championship. Although inheriting the 2-door coupe form and front section of its base road car, the racecar looked rather different and that aerodynamically honed form is recreated by a polycarbonate body, while separately molded components are used for the nose emblem, A pillar-mounted side mirrors, rear spoiler and rear wing. A full sticker sheet recreates this successful car's livery to round off the model.
TC-01: Seriously Low-Profile
This durable composite monocoque-frame chassis provides shaft driven 4WD from a central motor via front and rear propeller shafts, with oil filled gear differentials. 4-wheel independent double wishbone suspension employs long arms, plus inboard setups front and rear with oil dampers actuated by push rods and rocker arms to allow the use of low-profile bodies. Adjust spacer width to easily alter camber, skid and toe angle settings. Both suspension arms and uprights are identical left, right, front and rear, for more efficient pit work.
- Composite monocoque-frame chassis
- Midship motor, shaft-driven 4WD
- Front & rear oil-filled gear differentials
- 3-piece steering tie-rod
- Front & rear inboard 4-wheel independent double wishbone suspension
- CVA oil dampers (front & rear)
- Gear ratio = 7:50:1~5.25:1 (6.56:1 with kit 24T pinion)
- Type 540 motor and electronic speed controller (ESC) are sold separately
The powerful CLK-GTR form is recreated by a polycarbonate body, with a rear spoiler molded as a separate ABS part.
Multi-part A pillar-mounted side mirrors are made up of the base and mirror surface.
Mounted on twin stays, the rear wing is also molded in ABS plastic.
Mesh design wheels are paired with slick tires, with stickers in the box to recreate sidewall logos.
The TC-01 suits low-profile bodies thanks to its inboard suspension.
Long suspension arms use the same design across the model for easier pit work.
The inboard suspension has laid-down dampers actuated via pushrods and rocker arms. This image shows the front.
Use spacers to adjust camber, caster and toe angles.
Shaft-driven 4WD: the motor is mounted centrally in the monocoque frame, with power going via front and rear propeller shafts.
Fine-tune your differentials by changing the oil inside.
"A" design suspension arms are tough and realistic!
The rear also uses laid-down dampers.
Specifications
Reviews
Delivery & Pick-up
.
Shipping Costs
Shipping costs vary based on your location and the items being shipped and in some cases shipping may even be FREE.
To calculate what the shipping costs will be for your order, add the items you are interested in to your cart, view the Shopping Cart page, and select your 'Delivery Area' to calculate the shipping cost.
Shipping Security and Insurance
All orders shipped by PB Tech are sent via a courier with a signature required for each delivery. In some cases, and only where you have given the courier company permission to leave orders at a designated location, your order may be delivered without requiring a signature. All orders sent by PB Tech are fully insured in the unlikely event that your item(s) are damaged or go missing in transit.
Delivery Estimates
The delivery time-frame (in days) for each product we sell is detailed on the individual product page just to the right of the main product image. From when you place your order, for DHL express delivery in-stock products typically arrive within 2-3 working days for metro areas and 3-5 working days for rural areas. For Standard delivery in-stock products typically arrive within 3-7 working days for NSW, VIC, ACT, QLD and SA deliveries and 5-10 working days for WA, TAS and NT.
Overseas Shipments
If you are located in New Zealand, you can order directly from our New Zealand site www.pbtech.co.nz. If you are from another country you can order from www.pbtech.com
Returns & Warranty
Popular Cars
Aoshima - 1/24 - Toyota - Japan Taxi Checker 2017
Tamiya Big Scale Series No.46 - 1/12 - Team Lotus Type 72D 1972
Tamiya 18720 MINI 4WD K4 TASCHEL (FM-A)
Revell RV05664 007 GIFT SET 1/24 MUSTANG MACH-1
Academy 9-15617 1/24 Iconic Korean Brisa Car
Tamiya 58731 1/10 MERCEDES CLK GT-R (TC-01) EXCL ESC
- Brand: Tamiya
- MPN: Tamiya 58731
- Part #: MDLTMA58731
Product URL: https://www.pbtech.com/au/product/MDLTMA58731/Tamiya-58731-110-MERCEDES-CLK-GT-R-TC-01-EXCL-ESC
Features
This R/C model assembly kit recreates the Mercedes-Benz CLK-GTR car which took six wins in dominating the 1997 FIA GT Championship. Although inheriting the 2-door coupe form and front section of its base road car, the racecar looked rather different and that aerodynamically honed form is recreated by a polycarbonate body, while separately molded components are used for the nose emblem, A pillar-mounted side mirrors, rear spoiler and rear wing. A full sticker sheet recreates this successful car's livery to round off the model.
TC-01: Seriously Low-Profile
This durable composite monocoque-frame chassis provides shaft driven 4WD from a central motor via front and rear propeller shafts, with oil filled gear differentials. 4-wheel independent double wishbone suspension employs long arms, plus inboard setups front and rear with oil dampers actuated by push rods and rocker arms to allow the use of low-profile bodies. Adjust spacer width to easily alter camber, skid and toe angle settings. Both suspension arms and uprights are identical left, right, front and rear, for more efficient pit work.
- Composite monocoque-frame chassis
- Midship motor, shaft-driven 4WD
- Front & rear oil-filled gear differentials
- 3-piece steering tie-rod
- Front & rear inboard 4-wheel independent double wishbone suspension
- CVA oil dampers (front & rear)
- Gear ratio = 7:50:1~5.25:1 (6.56:1 with kit 24T pinion)
- Type 540 motor and electronic speed controller (ESC) are sold separately
The powerful CLK-GTR form is recreated by a polycarbonate body, with a rear spoiler molded as a separate ABS part.
Multi-part A pillar-mounted side mirrors are made up of the base and mirror surface.
Mounted on twin stays, the rear wing is also molded in ABS plastic.
Mesh design wheels are paired with slick tires, with stickers in the box to recreate sidewall logos.
The TC-01 suits low-profile bodies thanks to its inboard suspension.
Long suspension arms use the same design across the model for easier pit work.
The inboard suspension has laid-down dampers actuated via pushrods and rocker arms. This image shows the front.
Use spacers to adjust camber, caster and toe angles.
Shaft-driven 4WD: the motor is mounted centrally in the monocoque frame, with power going via front and rear propeller shafts.
Fine-tune your differentials by changing the oil inside.
"A" design suspension arms are tough and realistic!
The rear also uses laid-down dampers.
Specifications
Product Type
Plastic Model Assembly Kit
Brand
Tamiya
Scale
1/10
Length
470mm
Width
194mm
Height
115mm
Wheelbase
257mm
Tire Width/Diameter
26/67mm (front & rear)
Tread
159mm (front), 163mm (rear)
Gear Ratio
7:50:1~5.25:1 (6.56:1 with kit 24T pinion)
Separately Required Items (Not Included)
Type 540 motor
2-channel R/C system w/ESC
R6/AA/UM3 batteries for transmitter
Battery pack & charger
