Loctek Pro Mount, 10"-30" Dual Gas Spring Monitor Stand - Aluminum Black - Dual USB 3.0 Port - VESA 75 & 100mm - Max Load 9kg - 5 Years Warranty

First of all, I want to confirm this is an amazing product because it allows you to be a lot more flexible with how you move your monitors around. Working from home, I have essentially two settings for my monitors I affectionately call "work mode" and "home mode." I have two monitors and a work laptop to juggle around on my 120 x 600 cm table. I have an existing single arm Loctek monitor mount.

Please keep in mind that if you ware wanting to use this dual mount, you need a very deep table. For my two 24" monitors to be flush together, they have are right up to my face. For them to be flush to the wall, they are very far apart.

If you ...view more First of all, I want to confirm this is an amazing product because it allows you to be a lot more flexible with how you move your monitors around. Working from home, I have essentially two settings for my monitors I affectionately call "work mode" and "home mode." I have two monitors and a work laptop to juggle around on my 120 x 600 cm table. I have an existing single arm Loctek monitor mount.

Please keep in mind that if you ware wanting to use this dual mount, you need a very deep table. For my two 24" monitors to be flush together, they have are right up to my face. For them to be flush to the wall, they are very far apart.

If you have a very deep table, ideally more than 80 cm, by all means go for this dual monitor mount, It's flexible and the two extra USB ports are excellent. But if your table is average width, I'd instead recommend buying two single monitor arms mounted on opposite sides of the table.

Here's some measurements to help you decide if this is right for you. For the monitors to be flush side by side, allow up to 30 cm from the base. The base itself is about 10 cm. This means if your table is 60 cm wide like mine, the monitors are about 20 cm away from your face. Not very comfortable and bad for your eyes.

TL;DR: I only recommend buying this if your table is over 80cm wide

I'm using this with a 28" (3kg) and 24" (6kg) screen. It is able to support them properly - it struggles a wee bit with the 6kg one, but once setup I haven't had it move. If you regularly move them around I think it would become wobbly.

Overall build quality is OK - nothing amazing, but not shoddy either.
If you have substantially unequal sized monitors, or want to run one in portrait mode, this stand will likely not work for you - there are limitations with the swivel adjustments that will mean the monitors are right in your face (i.e. 40cm or so away from the back edge of the desk).

But if you have two identical sized lightweight scr...view more I'm using this with a 28" (3kg) and 24" (6kg) screen. It is able to support them properly - it struggles a wee bit with the 6kg one, but once setup I haven't had it move. If you regularly move them around I think it would become wobbly.

Overall build quality is OK - nothing amazing, but not shoddy either.
If you have substantially unequal sized monitors, or want to run one in portrait mode, this stand will likely not work for you - there are limitations with the swivel adjustments that will mean the monitors are right in your face (i.e. 40cm or so away from the back edge of the desk).

But if you have two identical sized lightweight screens, I think this would be a good choice.

These monitors mounts do not hold up at all to what they say. 9kg is absolutely false. It won't even begin to support my monitor at 7.3kg. Quite disappointed after going through all the effort to set up and have the monitor sit on the table.

Invest in something better. These monitors mounts do not hold up at all to what they say. 9kg is absolutely false. It won't even begin to support my monitor at 7.3kg. Quite disappointed after going through all the effort to set up and have the monitor sit on the table.

Invest in something better.

I can't knock it as it does do what its meant to, however personally I don't like how it extends out the back of the desk with the monitors sitting quite far forward. Wouldn't recommend to someone with limited desk space. I can't knock it as it does do what its meant to, however personally I don't like how it extends out the back of the desk with the monitors sitting quite far forward. Wouldn't recommend to someone with limited desk space.

For the price it’s good and does its job with no real issues. It would be nice if it had a bit more range of movement as the only way I could get my 2 monitors to fit properly and be together was if they were quite far forward so it may not be the best pick if you have a shallow desk. For the price it’s good and does its job with no real issues. It would be nice if it had a bit more range of movement as the only way I could get my 2 monitors to fit properly and be together was if they were quite far forward so it may not be the best pick if you have a shallow desk.

Don't buy this, the height adjustment is poor compared to a normal monitor stand. If you medium to tall do not buy this Don't buy this, the height adjustment is poor compared to a normal monitor stand. If you medium to tall do not buy this

Holds my 2x 27 inch monitors perfectly in place with out sagging and the 2 usb ports are perfect to plug in my mouse and keyboard Holds my 2x 27 inch monitors perfectly in place with out sagging and the 2 usb ports are perfect to plug in my mouse and keyboard

Works well, easy to set up. Pleased that we have less clutter on the desk now; USB 3.0 ports is a great idea!

FWIW it's on a glass surface desk and seems alright Works well, easy to set up. Pleased that we have less clutter on the desk now; USB 3.0 ports is a great idea!

FWIW it's on a glass surface desk and seems alright

I have had these motors arms for over a year now and am very happy with them. They are stable but easy to adjust especially rotating the screens slightly depending on what I’m doing. I would recommend placing the stand off centre by a monitor width or so if you want one of the screens to be centred.

The arm strength for hight, tilt etc is all adjustable to match the different screen weights. There is a screw on each joint that can be adjusted for this. I have had these motors arms for over a year now and am very happy with them. They are stable but easy to adjust especially rotating the screens slightly depending on what I’m doing. I would recommend placing the stand off centre by a monitor width or so if you want one of the screens to be centred.

The arm strength for hight, tilt etc is all adjustable to match the different screen weights. There is a screw on each joint that can be adjusted for this.

Sturdy and robust, yes. Do they go high enough so you don't have your neck constantly at the wrong level? Sadly, no. Not sure why the designer didn't think to make the bottom mount taller or more adjustable, however at the current max height is too short. Dimensions shown aren't the clearest to work out, however it's not really known until one has put together. Even shorter if you've a sit-to-stand desk (if you're tall and usually have to rise monitors higher). Plus side is it's sturdy and takes the weight of a monitor and laptop (I have the mount) however all screws are extremely stiff, so a lot of manual adjusting needed. Also what others'...view more Sturdy and robust, yes. Do they go high enough so you don't have your neck constantly at the wrong level? Sadly, no. Not sure why the designer didn't think to make the bottom mount taller or more adjustable, however at the current max height is too short. Dimensions shown aren't the clearest to work out, however it's not really known until one has put together. Even shorter if you've a sit-to-stand desk (if you're tall and usually have to rise monitors higher). Plus side is it's sturdy and takes the weight of a monitor and laptop (I have the mount) however all screws are extremely stiff, so a lot of manual adjusting needed. Also what others' have said about the desk real estate dominance is true - if you've got a 60cm depth desk I'd opt for 2x single mount arms.

Very happy with the arms for my screens Very happy with the arms for my screens

Works well, easy to set up. Pleased that we have less clutter on the desk now. Works well, easy to set up. Pleased that we have less clutter on the desk now.