Cambium Networks Cambium cnPulse Sync Generator with CambiumSYNC
Out of stock
Cambium Networks Cambium cnPulse Sync Generator with CambiumSYNC
- Brand: Cambium Networks
- MPN: C000000L066
- Part #: NETCBN010124
- UPC:
View all shipping info
- Brand: Cambium Networks
- MPN: C000000L066
- Part #: NETCBN010124
- UPC:
Features
Specifications
Reviews
Delivery & Pick-up
Returns & Warranty
Popular Other Networking





Cambium Networks Cambium cnPulse Sync Generator with CambiumSYNC
- Brand: Cambium Networks
- MPN: C000000L066
- Part #: NETCBN010124

Product URL: https://www.pbtech.com/au/product/NETCBN010124/Cambium-Networks-Cambium-cnPulse-Sync-Generator-wi
Features
Cambium cnPulse Sync Generator with CambiumSYNC
cnPulse is the latest GPS synchronization generation device designed specifically for Cambium Networks PMP and PTP radios. The cnPulse module is IP67 (weather proof and supports a wide temperature range for rugged environments.The GPS receiver is highly reliable and supports both GPS and GNSS signals. cnPulse gets it power from the ODU AUX port in mode 1 or from the CAT-5 drop cable in mode 2 so no external power supply is required. There are no configuration or software settings required.
TDD Synchronization is critical for deploying dense scalable wireless networks, whether in a PTP or PMP topology. One typical source for synchronization is the GPS satellite signal which carries a precise one pulse per second (1PPS) clock. Using this clock, PMP and PTP networks can synchronize the start and stop time of all transmissions. By synchronizing the transmit and receive signals, each AP or Access Point isn't transmitting while its neighbor is receiving, thereby reducing self-interference, increasing spectral efficiency and enabling much more dense network deployments.
Note that a single cnPulse can provide synchronization to two AP's by leveraging mode 1 on the first ODU and mode 2 on the second ODU.
Specifications
Manufacturer's Product Code
C000000L066B
Communication Standard
NMEA - 0183
Interface Technology
1 PPS, Tx GPS Location Data (Serial 8/N/1 9600 bps)
CambiumSYNC Mode Compatibility
PMP 450i, PTP 450i, PMP 450m, PTP 550, ePMP 2000, ePMP 3000
Aux Serial Mode Compatibility
CMM5, PMP 450m, PMP 450i, PTP 450i
Integrated Antenna
GPS L1, 1575.42MHz, GLONASS L1, 1598.0625~1605.375MHz
Tracking Channels
33 tracking/ 99 acquisition-channel GPS +GLONASS receiver
Update Rate
1 Hz (NMEA)
Timing Accuracy
±20ns RMS
Position Accuracy
3 meter
Acquisition - Cold Start
35 seconds (typical under open clear sky)
Acquisition Sensitivity
-148 dBm
Tracking Sensitivity
-165 dBm
Input Voltage
4.5V to 6.0 VDC at AUX Port (port 1), 44-59 VDC on PoE Input Port (port 3)
Max Power Consumption
0.3W Avg (0.5W Max @ 6V Aux), 2.4W Avg. (4W Max @ 59V Poe)
Interface 1
AUX PORT, RJ-45 8-pin shielded; AUX output
Interface 2
PoE + CambiumSYNC ODU, RJ-45 8-pin shielded; PoE + CambiumSYNC + Data output
Interface 3
PoE+ CambiumSYNC PIDU, RJ-45 8-pin shielded; PoE + Data Input
Temperature
-40C to +85C (-40F to +185F)
Humidity
0% to 95% humidity, non-condensing
Water/Dust Ingress
IP67
Pole Mount Diameter
25-70mm
Dimensions
16.8 cm x 9 cm x 10 cm (LxWxH) (6.6" x 3.5" x 4")
Weight
0.42 kg (15 ounces)