Teltonika RUT271 5G CAT4 N300 WiFi 4 Industrial RedCap Router

Mobile module 

5G Sub-6Ghz SA 223 Mbps DL , 123 Mbps UL; 4G LTE Cat 4 - LTE 195 Mbps DL, 105 Mbps UL

3GPP Release 

Release 17 RedCap

Bands 

5G NR SA: n1, n2, n3, n5, n7, n8, n12, n13, n14, n18, n20, n25, n26, n28, n30, n38, n40, n41, n48, n66, n70, n71, n77, n78, n79: 4G (LTE-FDD): B1, B2, B3, B4, B5, B7, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B30, B66, B70, B71: 4G (LTE-TDD): B34, B38, B39, B40, B41, B42, B43, B48

CPU 

Mediatek, 580 MHz, MIPS 24KEc

RAM 

128 MB, DDR2

FLASH storage 

32 MB, NOR Flash

Status 

IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC

SMS 

SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

USSD 

Supports sending and reading Unstructured Supplementary Service Data messages

APN 

Auto APN

Bridge 

Direct connection (bridge) between mobile ISP and device on LAN

Passthrough 

Router assigns its mobile WAN IP address to another device on LAN

Wireless mode 

802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA)

Wi-Fi security 

WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF)

Routing 

Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing

Network protocols 

TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake on Lan (WOL), VXLAN

Connection monitoring 

Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

Authentication 

Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator

Firewall 

Preconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64

Attack prevention 

DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

VLAN 

Port and tag-based VLAN separation

Monitoring & Management 

WEB UI, FOTA, SSH, SMS, Call, Email, TR-069, MQTT, SNMP, JSON-RPC, RMS

Input 

1 x Digital Input, 0 - 6 V detected as logic low, 8 - 30 V detected as logic high

Output 

1 x Digital Output, Open collector output, max output 30 V, 300 mA

Events 

Email, RMS, SMS

I/O juggler 

Allows to set certain I/O conditions to initiate event

Power Connector 

4-pin industrial DC power socket

Input voltage range 

9 - 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max

PoE (passive) 

Passive PoE over spare pairs. Possibility to power up through LAN1 port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, 9 - 30 VDC

Power consumption 

Idle: < 1.5 W, Max: < 3 W

Ethernet 

2 x RJ45 ports, 10/100 Mbps

I/O's 

1 x Digital Input, 1 x Digital Output on 4-pin power connector

Status LEDs 

3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED

SIM 

1 x SIM slot (Mini SIM - 2FF), 1.8 V/3 V, external SIM holder

Antennas 

2 x SMA for Mobile, 1 x RP-SMA for Wi-Fi

Reset 

Reboot/User default reset/Factory reset button

Casing material 

Aluminum housing, plastic panels

Dimensions (W x H x D) 

83 x 25 x 74 mm

Weight 

130 g

Mounting options 

DIN rail, wall mount, flat surface (all require additional kit)

Operating temperature 

-40 °C to 75 °C

Operating humidity 

10% to 90% non-condensing

Ingress Protection Rating 

IP30

Regulatory 

CE, FCC, ISED, CB, WEEE